.JPG)
.png)
| Model / Size | D355xID152.4*T15 Vit CBN Grinding Wheel for Camshaft |
| Grain Size | #80/100 |
| Camshaft Grinding Machine | PAlAMRY |
| Grinding Machine Speed | 2500 r.p.m. |
| Workpiece Hardness | HRC 55-60 |
| Wheel speed (m/s) | 50m/s |
| Camshaft Speed | 0~30 r.p.m. |
| Grinding allowance | 0.5mm-1mm |
| Cooling Liquid | Oil-water mixture |
| Model/ Size | 120*15*66*（21+17) Double ends vitrified bond CBN grinding wheel | |
| Grinding Machine | Applicable Grinding Machine | Toyoda (JKT） |
| Workpiece | Workpiece | Cam lobes of camshaft |
| Workpiece Material | GCr15 | |
| Hardness of grinding layer | HRC58-62 | |
| Grinding allowance | Diameter: 1.2mm Rough grinding(Φ0.99mm, speed 0.08mm/r) Semi-finishing(Φ0.11mm, speed 0.03mm/ r) Fine grinding (Φ0.02mm, speed 0.01mm/r) |
|
| Grinding Parameter | Wheel speed (m/s) | 72m/s |
| Roughness after grinding | Ra≤0.64 | |
| Grinding time | 66" | |
| Dressing Parameter | Dressing Tool | Sintering diamond roller |
| Cooling Liquid | oil cooling | |
| Grinding Wheel Life | grind about 8750 pieces | |
| Grinder | Junker | |
| Camshaft | Part | Camshaft journale |
| Material | JB/T6397 / EN10305-2 E355 | |
| Hardness | HBS 207-302 / HV10 210min | |
| working allowance | Diameter：0.9mm Rough grinding:0.9mm-0.1mm Finish grinding:0.1mm-0mm |
|
| Parameters | Wheel speed | 80m/s-120m/s |
| Roughness | Ra≤0.3.2 | |
| Precision | Roundness0.005 | |
| Tg | 90" | |
| Dressing | Tool | CNC Reverse Plated Dressers |
| Speed | 70 m/s | |
| Allowance | 0.003*6/7 | |
Coolant |
Oil | |
| Service life | 180 Camshaft journale/dressing | |
