Argentine Customer in Thermal Spray Industry- Case Study

                                             


Grinding wheel size: 1A1 D500-H305-T40-X10 Grit: 230/270
Workpiece: nickel-cadmium-boron alloy spray grinding  (75% nickel, 13% chromium, 3% boron, etc.)
Grinding workpiece diameter: 114.3 Length 370 mm. 
Feed: 0.02  
Feed rate: 1500 mm/min

                                           

Moresuperhard resin diamond/CBN grinding wheels vs. Other Brand's:

The customer could not grind the workpiece very well with resin cbn wheels from other brand before: because there was no cutting power, and the resin diamond consumed quickly and could be ground. Meanwhile, its service life was only about one week with the unsatisfied dffect. There is also the phenomenon of unring.

                       
                                      Evaluation during using                                        Evaluation after using 

Moresuperhard's resin grinding wheels: 

Our resin diamond grinding wheels can grind an average of about 400 workpieces (the others can only grind 200 workpieces). Overall, the diamond grinding wheels from Moresuperhard have twice the service life of the others. The customer said that our products' cost performance was very high and that they have met their expectations. Moreover, they expressed their willingness to have long-term cooperation with us.