Various Special Shaped CBN Wheels Round Diamond Sand

■ Due to its self-sharpening, resin bond wheel is easy to use and is suitable for roughing – finishing.
■ Due to moderate abrasive holding strength and wear-resistance, this wheel is suitable for roughing with free cutting.
■ Due to elasticity, this wheel using fine grits is suitable for finishing.

The diamond resin grinding wheel has a good polishing effect. The grinding wheel is sharp and not easy to be blocked during grinding.
The specific characteristics are as follows:
1. The grinding efficiency is high, and the grinding wheel consumption is relatively slow;
2. Good self-sharpening, low heat generation during grinding, not easy to block, reducing the phenomenon of work burns during grinding;
3. The grinding wheel has a certain elasticity, which is conducive to improving the roughness of the workpiece surface. It is mainly used for fine grinding, semi-fine grinding, knife grinding, polishing and other processes;
4. The diamond resin grinding wheel is cured at low temperature, the production cycle is short, and the equipment and supply process is relatively simple; due to the fluidity of the resin, it is easy to form a grinding wheel with complex surfaces

Vitrified bond diamond grinding wheels have been widely used in the PCD/PCBN tools edge processing, diamond edge processing, carbide cylindrical processing and camshaft grinding and other processing fields. Vitrified bond grinding wheels will produce a lot of heat in the process of high load during dry grinding. Using the cooling fluid with a vitrified grinding wheel the effect is more outstanding.
Many breakthroughs have been made in PCD composite material, CBN composite material and tungsten carbide processing, thus the application range of grinding wheels is wider.

► Bonded: resin bonded
► Application: precision grinding micro drill tools
Advantages of micro tool grinding wheel:
* Good edge stability
* High cutting efficiency
* Minimal reject-part rates
* Good round tool quality

A resin grinding wheel is mainly used for grinding brittle and hard metal materials:

① high manganese steel, high carbon steel, stainless steel, die steel, bearing steel;

② high chromium, nickel, molybdenum and other heat-resistant and high-hardness alloy steel;

③ chilled cast iron (HS80 ～90);

④ All kinds of hardened steel (HRC55～65); Impellers, volutes, guard plates, sheaths, etc.), molds, and cylinder liners; solves the cutting of high-hardness and difficult-to-machine materials in all walks of life, and can improve work efficiency, greatly save processing time and electricity, and obtain huge economic benefits.

Ball shape diamond coated, high abrasion resistance
Durable, and long service life, great for deburring and polishing
Used for sculpturing, dressing, precision grinding and internal grinding
Can be installed on the electronic, hanging mill, and hand electric drill
Widely used for metalwork, tool making, model engineering, wood carving, jewelry making, etc.
Material: Alloy and diamond
Shank Diameter: 6mm
Head Diameter: 12mm, 14mm, 16mm, 18mm, 20mm, 25mm
Shank Length: 35mm
Fine Gravel: 46 Grit
Coarse Gravel: 100 Grit
We support tailor-made products and services.

Diamond Wheels For Circular Saws ( Tungsten Carbide And Ceramet )
There parts grinding : face, top and side
Workpiece: carbide teeth
Bond: resin bond
Grinder: Vollmer, Woodtronic, Akemat, Widma and so on

Best suited for demanding applications where a harder-wearing, longer-lasting blade is required.
specifications can be made according to customers requirements.
FOR CUTTING THE UNMACHINABLES
Hardest material known grinds the hardest, most brittle, and most abrasive applications
– High Heat Resistance
– High Abrasion Resistance

 Moresuperhard is a leading manufacturer of CBN grinding wheels, which are used for precision grinding, shaping, and finishing of hard materials such as metals, ceramics, and composites

► Application: grinding various precision ceramic

► Bonded: resin bond & vitrified bond

► Correct choice of grain size and bonded
* Usually rough grinding uses D126, D91 (Resin bond &Vitrified bond)
* Semi-rough grinding uses D76, D64, D54, D46 (Resin bond & Vitrified bond)
* Semi-finish grinding uses D25, D20 (Resin bond &Vitrified bond)
* Finishing grinding uses D15 (Resin bond)
* Super finishing uses D7, D1 (Resin bond)

► Finishing or lapping operations are carried out by resin wheels to provide a good surface finish.

Vitrified bond diamond grinding wheels for high speed and high efficiency grinding PCD, PCBN cylindrical grinding, automotive engine processing, carbide, ceramic, quratz, glass, silicon wafer, thermal spray coating and magnetic materials, etc

Resin bond diamond & CBN grinding wheels have features of good self-sharpening, low heat generated during grinding, not easy to block and reduce the phenomenon of working burns during grinding. Resin bond has a certain elasticity and is conducive to improving the roughness of the workpiece surface, mainly used for fine grinding, semi-fine grinding, sharpening grinding, polishing and other processes. Therefore, resin bond diamond and CBN grinding wheels are widely used in the field of grinding and cutting.

Main Application
Resin bond grinding wheels have strong competitive advantages in the processing fields of carbide tools, ceramics, glass, PCBN tools, PDC cutter, Steel, cast iron, electronic information components precision cutting etc.

Moresuperhard has been developed superabrasive diamond wheel to dressing vitrified diamond pcd grinding wheel.
Advatages : compared with conventional grinding wheel, the diamond dressing wheel has good shape preserving property.
White corundum grinding cup wheels are used for dressing Coborn RG9 PCD Tool Grinding Wheels. Grinding wheels for dressing vitrified diamond PCD grinding wheels.

Moresuperhard provides qualified services For DANOBAT’s Precision Grinding Machines.
Centerless grinding models：ESTARTA-175 / ESTARTA-250, ESTARTA-400 / ESTARTA-650

► Resind diamond/CBN grinding wheels
► Conventional grinding wheels
► Diamond dressing wheels

► Model: 1A1, 1V1, 14A1, 3A1
► Application: fluting end mill, drill, cutter
► Advantages of flute wheel
* Online truing & dressing capability lower tooling cost
* Better edge quality

Diamond/ cbn grinding wheels are mainly used for the grinding of integral carbide, cermet, high speed steel, stainless steel drill, milling cutter and reamer.
The main materials of cnc cutting tools are cemented carbide, high-speed steel, stainless steel and so on.

The function of a profile roller dresser is to achieve a geometric profile and the desired wheel topography. The coordinated system of the Moresuperhard diamond roller dresser with the corresponding grinding wheel reduces thermal stress on the workpiece, enabling you to achieve optimum grinding results.

* High accuracy
* Great consistency
* High cost-effectiveness

Moresuperhard CBN wheel is suitable for high precision formed wheels. Such as grinding of high precision gear, worm gear hob, gearbox shafts, planetary reducers (sun gear, planetary gears), worm reducers (yin and yang rotors), stator inner teeth and outer rotor grinding.

Application: sculpturing, dressing and internal grinding carbide, ceramic,glass, stones, marble,etc

Types of internal grinding wheel:
* vitrified cbn internal grinding wheel
* resin diamond & cbn internal wheel
* electroplated diamond mounted points
* abrasive internal grinding wheel

* Workpiece Materials: grinding tungsten carbide cutting tools, ceramic, magnetic materials, silicon, glass, quartz and thermal spraying alloy, etc.

* Applicable Industry: CNC Tool Grinding, Woodworking Tool Grinding, Thermal Spraying Coated, Silicon Wafer Grinding, etc.

Features:
High precision and efficiency grinding performance.
Long service life, meaning that the wheels will not wear out quickly.
Good thermal stability, ensuring that the wheels maintain their shape and size.
Chemically stable and corrosion-resistant materials are used, ensuring that the wheels do not rust or corrode.
The wheels are designed to be lightweight and easy to use.

►High Precision Centerless Grinding Machines Models:
-FX12CNC
-FX18CNC-4

►Broad Applications:
-Automotive Industry: shafts, pins, valves, and bearings
-Aerospace Industry: turbine shafts, landing gear components, and fuel system parts
-Medical Industry
-Tool and Die Industry
-Bearings industry
-Tool and Die Industry: cutting tools, punches, and dies with high accuracy and surface quality

Moresuperhard provides qualified services For DANOBAT’s Precision Grinding Machines.
External grinding models：CG, PG, LG, HG, WT, mBTG-DANTIP,
Internal grinding models: ID, IRD,ILD, IED.

► Vitrified diamond/CBN grinding wheels
► Resind diamond/CBN grinding wheels
► Conventional grinding wheels
► Diamond dressing wheels

1.Constant power section design reduces the cost of the inverter.
2.Reliable life with the application of P4 precision ceramic ball bearings.
3. Low heat loss with use of Copper rotor motor or imported motor.
Based on the above features, our high frequency and high speed spindles play the important role in improving the production efficiency and machining quality.

Solid Steel Concave Diamond Grinding Wheel: 4″ in Diameter x 1/2″ Wide, 1″ Hole. Order optional bushings if you have a 1/2″, 5/8″ or 3/4″ arbor (for this wheel order one 1/2″ wide bushings to make the 1/2″ span across the hole).
High-quality nickel-plated diamond on steel.
Grit sizes available: 80, 120, 220, 400, & 600 grit