CBN Grinding Wheel Manufacturer

A resin grinding wheel is mainly used for grinding brittle and hard metal materials:

① high manganese steel, high carbon steel, stainless steel, die steel, bearing steel;

② high chromium, nickel, molybdenum and other heat-resistant and high-hardness alloy steel;

③ chilled cast iron (HS80 ～90);

④ All kinds of hardened steel (HRC55～65); Impellers, volutes, guard plates, sheaths, etc.), molds, and cylinder liners; solves the cutting of high-hardness and difficult-to-machine materials in all walks of life, and can improve work efficiency, greatly save processing time and electricity, and obtain huge economic benefits.

► Edge wheel for silicon and sapphire wafer edge grinding. A small diameter wheel is used for notch grinding
► Metal diamond wheel for rough grinding to get an accurate edge profile
► Resin diamond wheel for finish grinding to get good surface roughness

Resin diamond wheels are used for tungsten carbide tools, automotive glass, PDC, PCD, PCBN, ceramics, sapphire, optical glass, and magnetic materials.
Resin bond diamond grinding wheel features a small grinding force, less grinding heat, good self-sharpening, high efficiency, and high surface finish. It is mainly used for cutting, finish grinding, semi-finish grinding, sharpening, and polishing.

For natural diamond (MCD) or synthetic single crystal diamond (SCD)cutting tools.

Moresuperhard’s Electroplated CBN diamond grinding wheels for hip joint broach
► Body Type: steel core CBN wheel, aluminum core CBN wheel and plastic CBN wheel
► Diameter: 6 inches, 8 inches and 10 inch
► Thickness :1 inch, 1.5 inches and 2 inch
► Arbor hole:1/2 inch, 5/8 inch, 1-1/4 inch
► Radius edge: 1/4 inch
► Grain Size: 80#, 180#, 220#, 350#, 600#, 800#, 1200# etc.
Applicable grinder: sharpening woodturning tools (high-speed steel HSS) on a bench grinder
► Advantages: * Fast and cool cutting action without coolant
* No need to dress or turn

Resin bond diamond mounted point is an abrasive tool used for fast stock removal which lasts longer for about four times compared to conventional aluminum oxide mounted points. This makes it a very efficient tool as its increases productivity and clearly cleans more parts in less time. This mounted point is mainly used for machining tungsten carbide cutting tools, optical glass, gem, semi-conductor materials, non-ferrous materials, ceramic, magnetic materials, silicon, glass, quartz, thermal spraying alloy, and non-metallic material grinding.

► Application: harder alloys, ceramics and cermet.
► Bonded: resin bond

► Application: inner grinding of bearing, compressor, CVJ ball-cage, hydraulic tappets, universal joint, stator and rotor .
► Body type: ID Wheel with Shank, ID Wheel without Shank
► Model type: 1A8, 1A1W, 1A1, DWA
► We can offer: abrasive internal grinding wheel (PA, SG), CBN internal grinding wheel, Diamond internal grinding wh

1.Constant power section design reduces the cost of the inverter.
2.Reliable life with the application of P4 precision ceramic ball bearings.
3. Low heat loss with use of Copper rotor motor or imported motor.
Based on the above features, our high frequency and high speed spindles play the important role in improving the production efficiency and machining quality.

► Application: precision grinding micro drill tools
Advantages of micro tool grinding wheel:
* Good edge stability
* High cutting efficiency
* Minimal reject-part rates
* Good round tool quality

► Good concentricity, less runout, small tolerance
► Round hole/Face/Square hole/Arc/Groove/ Spherical/ contour grinding
► Bond: resin bond/ electroplated/ vitrified
► Grinding machine: Moore, Hauser, Mitsuiseiki, Waida and Jingtian, etc.
► Grit：40 #-1000#

► Application: harder alloys, ceramics and cermet.
► Bonded: resin bond

Best suited for demanding applications where a harder-wearing, longer-lasting blade is required.
specifications can be made according to customers requirements

strict quality testing of Moresuperhard’s silicon and sapphire wafer edge grinding wheels

Metal bonded diamond wheels are best suited for edge rough grinding and have coarser diamonds for higher material removal. The diamonds are embedded in a sintered metal matrix. These wheels can either have a segmented pattern for edge rough grinding or a continuous pattern for fine grinding.
Features:
Wear resistant with a longer service life
The higher material removal rate
High grinding efficiency

Application: sculpturing, dressing and internal grinding carbide, ceramic,glass, stones, marble,etc

► Single point diamond dressers
► Multi point diamond dressers
► Forming diamond dresser
► Impregnated diamond dressers
Application:dressing straight type conventional abrasive wheels. Dressing ceramic abrasive SG grinding wheels ,simple profiles, thread and gear grinding

► Diamond; CBN honing stone, honing stick
► Bonded: metal bond
► Materials of workpiece: carbide,glass and ceramic,cast iron,alloy steel, tool steel, die steel, hardened steel copper, aluminum alloy and other abrasive resistant materials
► Applicable area: fine grinding engine pump body, hydraulic cylinder bore, hydraulic pump inner bore, cylinder block, valve,oil cylinder nozzle, the inner surface of the spline bore and cylinder hole and blind hole of other series.

Feartures Of Diamond Burs, Diamond Mounted Points
* With different sizes and coarseness* Various shapes include, bullet, cone,round cylinder,barrel, flat top cylinder and dental, etc
* Fit Dremel type and rotary tools
* High grinding effect and long using life
* Convenient to grind, simple to use, safe and reliable
* No dust pollution, high performance ratio

Our film belt is ：
1. with high grinding consistency
2. with high grinding capacity to achieve the precise polishing effect
3. with high flexibility to achieve the ideal surface polishing effect
4. Suitable for dry polishing.

Diamond Wheels For Circular Saws ( Tungsten Carbide And Ceramet )
There parts grinding : face, top and side
Workpiece: carbide teeth
Bond: resin bond
Grinder: Vollmer, Woodtronic, Akemat, Widma and so on

Resin diamond grinding wheels are used for round cutting tools on cnc machine, including drills, milling cutters, reamers, taps, etc. The main materials are cemented carbide, high-speed steel, stainless steel and so on.
Model: 1a1, 12v9, 11v9, 12a2, 1v1, 14a1, 6a2, etc
Bonded: resin bond, metal bond and hybrid bond

► Application: grinding carbide and HSS. (such as drill, end mill, reamer)
► A complete solution for CNC tools manufacturing: fluting, gashing and Clear edge, relief angle grinding, OD grinding
► Model: 1A1, 1V1, 11V9, 12V9, 14A1, 12V5, etc