M41 Series Surface Belt Grinding Machine

Diamond CBN grinding wheel heads are used because of their durability and their ability to cleanly cut the harder alloys, ceramics and cermet.

► Diamond; CBN honing stone, honing stick
► Bonded: metal bond
► Materials of workpiece: carbide,glass and ceramic,cast iron,alloy steel, tool steel, die steel, hardened steel copper, aluminum alloy and other abrasive resistant materials
► Applicable area: fine grinding engine pump body, hydraulic cylinder bore, hydraulic pump inner bore, cylinder block, valve,oil cylinder nozzle, the inner surface of the spline bore and cylinder hole and blind hole of other series.

Grinding and regrinding cutting tools (pcd inserts, cbn inserts, mono crystal diamond ( MCD ) tools, pcd reamer, carbide tools, cermet inserts)
► Bonded of cutting tools grinding wheel: vitrified diamond cup wheel, resin diamond cup wheel and metal diamond cup wheel
► Diamond Width: 3mm, 5mm, 10mm, 15mm, 20mm
►Grain size can reach 4000# super finish

►Diamond coated head. Wear-resistant, close to the sand surface, not easy to fall off, maintains sharpness, long wear. 
►Its surface can be cleaned and restored to regain its original shape by using a dressing stone. 

►Can be installed on the electronic grinder, hanging mill and hand electric drill (not included here).
►Used for sculpturing, dressing, precision grinding and internal grinding carbide in ceramic, glass, precious stone, alloy and many other abrasive materials.
►Adding water when using the Diamond grinding head is good, can improve the sharpness and the life of the grinding needle.

Resin bond diamond & CBN wheels are mainly used for small-diameter tungsten, stainless steel or hss drills, micro drills, and end mills used in electronics, medical technology, and the automotive industry.
Advantages of micro tool grinding wheel:
* Good edge stability
* High cutting efficiency
* Minimal reject-part rates
* Good round tool quality

Ensuring an excellent finish by simply drawing the blade through the groove over the two grinding wheels
-Lower cutting time and higher cutting efficiency
-No need for dressing
-Long lifespan
Grit: 80/100, 140/170, 170/200…

►Excellent Grinding Action
►less apt to experience loading, and they dress easily for added convenience
►Convenience and Ease of Use
►Grinding abilities apply to both wet and dry tasks on processing objects such as harden steel, glass, ceramic, carbide alloys, ferrite, refractories, semi conductors, and other electrical carbon products.

6a9 Resin bonded diamond cbn grinding wheels are used for grinding tungsten carbide, HSS, milling cutter, reamer and drill, etc
CNC grinding machines include,Walter, Anca, Ewag, Vollmer, Rollomatic, Schutte, Schneeberger, Makino, TG-5, Stuer, Strausak, Cininnati, Griffo, Huffmann, Jungner

Moresuperhard provides qualified services For DANOBAT’s Precision Grinding Machines.
Centerless grinding models：ESTARTA-175 / ESTARTA-250, ESTARTA-400 / ESTARTA-650

► Resind diamond/CBN grinding wheels
► Conventional grinding wheels
► Diamond dressing wheels

Applications: face grinding, top grinding, flank grinding, hollow tooth grinding and re-sharpening for tungsten carbide tipped saw blades and one-piece HSS saws.
Models: 4A2, 4BT9, 11A2, 15A2, 12V2, 14F1, etc
Bonded: Resin bond, vitrified bond
Grinding Machine: Vollmer, Woodtronic, Akemat, Widma and so on

Features:
High precision and efficiency grinding performance.
Long service life, meaning that the wheels will not wear out quickly.
Good thermal stability, ensuring that the wheels maintain their shape and size.
Chemically stable and corrosion-resistant materials are used, ensuring that the wheels do not rust or corrode.
The wheels are designed to be lightweight and easy to use.

Electroplated diamond & cbn wheels used for profile grinding tungsten carbide, stainless steel, HS steel, zirconia / aluminum oxide, powdered metals, sintered silicon carbide

► Application: grinding carbide, ceramic, magnetic materials, stainless steel bar, PCD & PCBN compositives
► Model: 1A1 , 6A1, 9A1
► Bonded Type: Resin bond, Metal bond
► Centerless Grinder Machine: Koyo, Crystec, Dedtru, Landis , Okuma, Paragon, Royal Master, Unison, WMV

Vitrified bond diamond grinding wheels have been widely used in the PCD/PCBN tools edge processing, diamond edge processing, carbide cylindrical processing and camshaft grinding and other processing fields. Vitrified bond grinding wheels will produce a lot of heat in the process of high load during dry grinding. Using the cooling fluid with a vitrified grinding wheel the effect is more outstanding.
Many breakthroughs have been made in PCD composite material, CBN composite material and tungsten carbide processing, thus the application range of grinding wheels is wider.

Vitrified diamond grinding wheels are suitable for grinding, regrinding cutting tools (such as carbide, ceramic, cermet, pcd, pcbn, cvd, mcd)
Custom PCD tools, CBN tools, CVD diamond tools and Mono Crystal diamond tools cutting, brazing, grinding, sharpening, regrind and retipped service and solution.

►High Efficiency
►Long Lifespan
►Wide Range of Applications
►Consistent Performance:
►Low Maintenance

► Application: precision grinding micro drill tools
Advantages of micro tool grinding wheel:
* Good edge stability
* High cutting efficiency
* Minimal reject-part rates
* Good round tool quality

Usage:
1. Especially used for internal grinding of complex workpieces.
2. Used for dressing abrasive tools.
3. Used for processing industrial ceramics.
4. Suitable for processing and polishing cemented carbide, various molds, stone, glass, jade, gems, teeth, bones, high-speed steel and various high-hardness materials.

Vitrified bond diamond grinding wheels have been widely used in the PCD/PCBN tools edge processing, diamond edge processing, carbide cylindrical processing and camshaft grinding and other processing fields. Vitrified bond grinding wheels will produce a lot of heat in the process of high load during dry grinding. Using the cooling fluid with a vitrified grinding wheel the effect is more outstanding.
Many breakthroughs have been made in PCD composite material, CBN composite material and tungsten carbide processing, thus the application range of grinding wheels is wider.
Application: grinding camshaft in automobile

► Application: Grinding engine valves (inlet valves and exhaust valves) in cars, motorcycles, trucks, and other engine valves
► Speed of CBN Wheel: 80-140 m/s
► No need to dress

Vitrified diamond grinding wheels for grinding PCD & PCBN cutting tools, CVD tools, MCD tools, milling cutter, reamer, drill and regrinding, etc.

The bond strength of this type of diamond grinding wheel is weaker than that of other wheels. The self-sharpening for carbide saw blade is better, no blocking.
Diamond and CBN wheels for sharpening circular saw blades (TC, HSS)
Models of grinding wheel: 4A2, 4BT9, 4A9, 3A1, 14A1, 6V5, 6A2, 1A8W, 14F1, etc
CNC machines: Vollmer, Woodtronic, Akemat, Widma and so on