Resin bond diamond grinding wheel for face top side grinding hybrid diamond grinding wheel

Ensuring an excellent finish by simply drawing the blade through the groove over the two grinding wheels
-Lower cutting time and higher cutting efficiency
-No need for dressing
-Long lifespan
Grit: 80/100, 140/170, 170/200…

Brazing diamond tool is a tool product which solders a layer of diamond firmly on the metal matrix through the melting process of metal solder. This kind of product has the characteristics of higher efficiency, the long service life of a single diamond particle and high grinding accuracy. The main products cover all coarse and medium-sized electroplated diamond tools and some hot-pressed diamond tools.
In order to avoid the problems of low holding power, small chip space, low exposure height and easy falling off caused by traditional manufacturing methods, and to make greater use of the advantages of single-layer diamond tools, brazing technology has been applied to the field of diamond tools manufacturing since 2000 and has developed rapidly. Brazing technology, as a new manufacturing method of diamond tools, has attracted wide attention all over the world.

The feed rate of the grinding resin grinding wheel of the more superhard five-axis milling cutter can reach 100-120MM/M, and the cutting depth is 3-4.5MM at a time.
5 axis cnc grinding wheels has the characteristics of high efficiency and good durability.
The ground tool is not only smooth and clean. Good, and suitable for all kinds of machine tools, and can replace imported similar products.

Vitrified bond diamond grinding wheels have been widely used in the PCD/PCBN tools edge processing, diamond edge processing, carbide cylindrical processing and camshaft grinding and other processing fields. Vitrified bond grinding wheels will produce a lot of heat in the process of high load during dry grinding. Using the cooling fluid with a vitrified grinding wheel the effect is more outstanding.
Many breakthroughs have been made in PCD composite material, CBN composite material and tungsten carbide processing, thus the application range of grinding wheels is wider.

Feartures Of Diamond Burs, Diamond Mounted Points
* With different sizes and coarseness
* Various shapes include, bullet, cone,round cylinder,barrel, flat top cylinder and dental, etc

* Fit Dremel type and rotary tools
* High grinding effect and long using life
* Convenient to grind, simple to use, safe and reliable
* No dust pollution, high performance ratio

Moresuperhard’s Electroplated CBN diamond grinding wheels for hip joint broach
► Body Type: steel core CBN wheel, aluminum core CBN wheel and plastic CBN wheel
► Diameter: 6 inches, 8 inches and 10 inch
► Thickness :1 inch, 1.5 inches and 2 inch
► Arbor hole:1/2 inch, 5/8 inch, 1-1/4 inch
► Radius edge: 1/4 inch
► Grain Size: 80#, 180#, 220#, 350#, 600#, 800#, 1200# etc.
Applicable grinder: sharpening woodturning tools (high-speed steel HSS) on a bench grinder
► Advantages: * Fast and cool cutting action without coolant
* No need to dress or turn

• Reduction of dressing costs per workpiece
• Optimized utilization of machine capacity
• Automation of the dressing process
• Repeatable high precision with low workpiece rejects
• Rapid incorporation of complex profiles in the grinding wheel

– Semi Closed Grinder
– Full Cover Grinder
– With Manipulator Grinder
– With Robot Grinder
CNC cylindrical grinder can not only be available for producing shapes like cylinders, but also shapes including cam, ellipse, or crankshaft
CNC grinding machines offer greater flexibility and easier operation

► Steady drilling with better smoothness
► Free drilling and long lifespan
► No damage to the edge
► High drilling efficiency

► Applications: face grinding, top grinding, flank grinding, hollow tooth grinding and re-sharpening for tungsten carbide tipped saw blades and one-piece HSS saws
► Models: 4A2, 4BT9, 11A2, 15A2, 12V2, 14F1, etc
► Bonded: Resin bond, vitrified bond
► Grinding Machine: Vollmer, Woodtronic, Akemat, Widma and so on

A resin grinding wheel is mainly used for grinding brittle and hard metal materials:

① high manganese steel, high carbon steel, stainless steel, die steel, bearing steel;

② high chromium, nickel, molybdenum and other heat-resistant and high-hardness alloy steel;

③ chilled cast iron (HS80 ～90);

④ All kinds of hardened steel (HRC55～65); Impellers, volutes, guard plates, sheaths, etc.), molds, and cylinder liners; solves the cutting of high-hardness and difficult-to-machine materials in all walks of life, and can improve work efficiency, greatly save processing time and electricity, and obtain huge economic benefits.

6A2 150*40*40*15*5,1500# vitrified diamond wheel for PCD，In order to meet the needs of customers，our grinding wheel grit size can reach 2000#, 3000#, 4000#, 6000#
For more product information, please visit our website to view

The diamond resin grinding wheel has a good polishing effect. The grinding wheel is sharp and not easy to be blocked during grinding.
The specific characteristics are as follows:
1. The grinding efficiency is high, and the grinding wheel consumption is relatively slow;
2. Good self-sharpening, low heat generation during grinding, not easy to block, reducing the phenomenon of work burns during grinding;
3. The grinding wheel has a certain elasticity, which is conducive to improving the roughness of the workpiece surface. It is mainly used for fine grinding, semi-fine grinding, knife grinding, polishing and other processes;
4. The diamond resin grinding wheel is cured at low temperature, the production cycle is short, and the equipment and supply process is relatively simple; due to the fluidity of the resin, it is easy to form a grinding wheel with complex surfaces

►Excellent Grinding Action
►less apt to experience loading, and they dress easily for added convenience
►Convenience and Ease of Use
►Grinding abilities apply to both wet and dry tasks on processing objects such as harden steel, glass, ceramic, carbide alloys, ferrite, refractories, semi conductors, and other electrical carbon products.

►Excellent Grinding Action
►less apt to experience loading, and they dress easily for added convenience
►Convenience and Ease of Use
►Grinding abilities apply to both wet and dry tasks on processing objects such as harden steel, glass, ceramic, carbide alloys, ferrite, refractories, semi conductors, and other electrical carbon products.

Moresuperhard provides qualified services For DANOBAT’s Precision Grinding Machines.
Centerless grinding models：ESTARTA-175 / ESTARTA-250, ESTARTA-400 / ESTARTA-650

► Resind diamond/CBN grinding wheels
► Conventional grinding wheels
► Diamond dressing wheels

The Wheel Dresser is designed to provide easy and efficient dressing of diamond /CBN grinding wheels and grinding wheel spindles consisting of several grinding wheels.
►Diamond & CBN wheel dressing machine Models NM-X3 NM-X5 NM-X6
►Applications: -Dressing diamond /CBN grinding wheels -Dressing flat, side, angular, external and profile wheels -Single and multiple wheel combinations

Diamond and cbn wheels are widely used for grinding cnc cutting tools, such as tungsten carbide, high speed steel (HSS), stainless drill ,end mill and reamer.
Model: 1a1, 14a1, 11v9, 1v1, 12v9, 14f1
Bonded: resin bond/ hybrid bond grinding wheel
The applicable CNC machines include, Walter, Anca, Ewag, Vollmer, Rollomatic, Schutte, Schneeberger, Makino, TG-5, Stuer, Strausak, Cininnati, Griffo, Huffmann, Jungner

Resin Flute grindingwheels are used for high speed steel cutting tools. Such as drills,end mills,taps,reamers,central drills and broach etc. Also used for grinding control worm of automobile,balling screw of grinder and rotor flute on oil pump.

Resin grinding wheels are used for flute grinding high-speed steel cutting tools such as drills,end mills,taps,reamers,central drills and broach etc
CNC Grinding Machine: HERTLEIN,NORMAC,GUHRING,JUNKER,LIDKOPPING etc.

► Application: precise grinding mould and die, punch pin, optical grinding and form grinding cutting tool ( such as end mill and reamer) and precise instrument
► Model: 1A1, 3A1, 14A1, 1V1, 11V9, 12V9, 4B1, 3A1, 14K1, 1B9
► Bonded: resin bond & metal bond
► Optical Profile Grinder: Amada, Waida, Wasion, etc

►Excellent Grinding Action
►less apt to experience loading, and they dress easily for added convenience
►Convenience and Ease of Use
►Grinding abilities apply to both wet and dry tasks on processing objects such as harden steel, glass, ceramic, carbide alloys, ferrite, refractories, semi conductors, and other electrical carbon products.

More superhard provide the solution for Round Tools ( tungsten carbide, HSS, milling cutter, reamer and drill ) Grinding.
Grinding Wheel for 4 Axis CNC Tool Regrinding Machine
Bonded of Grinding Wheel: resin diamond & cbn wheel, electroplated diamond & cbn wheel

MoreSuperhard offers custom precision ceramic grinding, lapping and polishing service and solution.
– diamond and cbn double sided grinding wheels surface grinding ceramic
– diamond cylindrical grinding wheels for technical ceramic
– diamond centerless grinding ceramic
– diamond cut off wheel for cutting ceramic, etc

Resin bond diamond grinding wheel for grinding and resharpening carbide drills; Resin bond Cubic Boron Nitride grinding wheel for grinding and resharpening high-speed steel drills.
Advantages:
High grinding efficiency；
High material removal rate；
High tools surface finish and good cutting edge quality；
The shape of the grinding wheel is kept well；
High machining accuracy；
Low loss, low thermal damage, no burn of the workpiece；
Wear-resistant, long working life；