Moresuperhard Qualified CBN Wheels for Knife Sharpening

Vitrified bond diamond grinding wheels have been widely used in the PCD/PCBN tools edge processing, diamond edge processing, carbide cylindrical processing and camshaft grinding and other processing fields. Vitrified bond grinding wheels will produce a lot of heat in the process of high load during dry grinding. Using the cooling fluid with a vitrified grinding wheel the effect is more outstanding.
Many breakthroughs have been made in PCD composite material, CBN composite material and tungsten carbide processing, thus the application range of grinding wheels is wider.
Application: grinding camshaft in automobile

Brazing diamond tool is a tool product which solders a layer of diamond firmly on the metal matrix through the melting process of metal solder. This kind of product has the characteristics of higher efficiency, the long service life of a single diamond particle and high grinding accuracy. The main products cover all coarse and medium-sized electroplated diamond tools and some hot-pressed diamond tools.
In order to avoid the problems of low holding power, small chip space, low exposure height and easy falling off caused by traditional manufacturing methods, and to make greater use of the advantages of single-layer diamond tools, brazing technology has been applied to the field of diamond tools manufacturing since 2000 and has developed rapidly. Brazing technology, as a new manufacturing method of diamond tools, has attracted wide attention all over the world.

Feartures Of Diamond Burs, Diamond Mounted Points
* With different sizes and coarseness* Various shapes include, bullet, cone,round cylinder,barrel, flat top cylinder and dental, etc
* Fit Dremel type and rotary tools
* High grinding effect and long using life
* Convenient to grind, simple to use, safe and reliable
* No dust pollution, high performance ratio

Diamond grinding wheels for grindingTungsten Carbide, Ceramics, Composites, Stainless Steel, HS Steel, Titanium Nitride, Zirconia / Aluminum Oxide, Ferrites, Powdered Metals, Sintered Silicon Carbide, Titanium Graphite Composite

• To shape grinding wheels in the shortest possible time
• Profiling of the grinding wheel in only one operation using the plunge-cut dressing method
• Extreme accuracy, even with highly complex profile contours
• Highest cost-effectiveness

Diamond grinding wheels for grindingTungsten Carbide, Ceramics, Composites, Stainless Steel, HS Steel, Titanium Nitride, Zirconia / Aluminum Oxide, Ferrites, Powdered Metals, Sintered Silicon Carbide, Titanium Graphite Composite

Main features of CNC profile grinding wheels
Perfect processing quality
High efficient grinding with fast feeding
Good wear resistance and shape keeping 
Applications of cnc grinding wheel
Mainly used for grinding digital controlled cutting tools such as tungsten carbide, high speed steel, stainless drill, mill and rimer.  
Type: 1a1, 14a1, 11v9, 1v1, 12v9, 14f1

Resin bond diamond & CBN grinding wheels have features of good self-sharpening, low heat generated during grinding, not easy to block and reduce the phenomenon of working burns during grinding. Resin bond has a certain elasticity and is conducive to improving the roughness of the workpiece surface, mainly used for fine grinding, semi-fine grinding, sharpening grinding, polishing and other processes. Therefore, resin bond diamond and CBN grinding wheels are widely used in the field of grinding and cutting.

Metal bond Diamond wheels can be used for processing high quality side windows glass, front and back windshield

Rough grinding and fine milling of auto glass

Machine: shape edging machine, profiling milling machine,CNC equipment etc(such as Bystronic, Bando machine)
Application:
For rough grinding and fine milling of auto glass. Mainly used for shape edging machine, profiling milling machine,CNC equipment etc(such as Bystronic, Bando machine).

Advantages:
1.Accurate Aperture
2.High pass rate
3.Even smoothness
4.Long service life

Our film belt is ：1. with high grinding consistency ;
2. with high grinding capacity，which can achieve precise polishing effect;
3. with high flexibility to achieve the ideal surface polishing effect；
4. Suitable for dry polishing.

Good self-sharpening and superb grinding efficiency
D750*H305&T75*X10mm
Good for grinding and processing hard and brittle materials such as ceramics, glass and tungsten carbide.

Body Material: Aluminum or Steel
Grain size: all grain size can be customized
Usage: grinding, sharpening, polishing
Bond: resin,vitrified,electroplated,metal bond are also available
Work piece: metal,HSS,tungsten carbide,glass,stone…etc
Size: all sizes,like 100mm,150mm,175mm,200mm,250mm….etc

► Vitrified bond and Resin bond: vitrified bond has a longer lifespan and higher efficiency than resin bond
► Used for the cylindrical grinding of tungsten carbide
► Models: 6A2(Diameter: 100mm-1200mm)

Moresuperhard provides a line of solution and services for ultra performance cnc tools grinding on CNC machines.
Fluting, gashing, OD grinding tungsten carbide, HSS, milling cutter, reamer and drill, etc
Applicable cnc machines include,Walter, Anca, Ewag, Vollmer, Rollomatic, Schutte, Schneeberger, Makino, TG-5, Stuer, Strausak, Cininnati, Griffo, Huffmann, Jungner

► Bonded: vitrified bond, resin bond, metal bond
► Width: 1mm – 20mm
► Up to #10000 for super finish
► Cutting-edge chipping <5 μm ► Provide dressing wheel to dress PCD grinding wheel

MORESUPERHARD is a professional manufacturer of grinding, cutting, polishing and dressing tools. Thanks to abundant experience in surface treatment, we design and offer a complete grinding and dressing solution to our customers in various industries. With innovative and creative development conception, MORESUPERHARD is tirelessly striving to provide excellent design, superior quality and perfect service to world-wide customers. We have devoted to offer various diamond & CBN wheels for carbide, HSS, PCD, PCBN machining according to customers’ requirements and FEPA Standard.

► Application: inner grinding of bearing, compressor, CVJ ball-cage, hydraulic tappets, universal joint, stator and rotor .
► Body type: ID Wheel with Shank, ID Wheel without Shank
► Model type: 1A8, 1A1W, 1A1, DWA
► We can offer: abrasive internal grinding wheel (PA, SG), CBN internal grinding wheel, Diamond internal grinding wheel

► Bonded: resin bonded
► Application: precision grinding micro drill tools
Advantages of micro tool grinding wheel:
* Good edge stability
* High cutting efficiency
* Minimal reject-part rates
* Good round tool quality

Vitrified bond diamond grinding wheels have been widely used in the PCD/PCBN tools edge processing, diamond edge processing, carbide cylindrical processing and camshaft grinding and other processing fields. Vitrified bond grinding wheels will produce a lot of heat in the process of high load during dry grinding. Using the cooling fluid with vitrified grinding wheels the effect is more outstanding. The diameter range, the thickness range and the grit size range can be customerized according to customers’ requirement.

►Accurately grinding Tungsten Carbide, Ceramic, Cermet, Steel HRC, Glass and Others, etc.
►Diameter 20- Diameter 900, customized as your request
►CBN+aluminum body

Resin Bond CBN Grinding Wheel feature:
1）high efficiency；
2）abrasion resistance, high consumption
3）Small grinding force, grinding temperature is low
4）high accuracy and good surface quality of the workpiece, the shape of the workpiece stability is good
5）with more pores, grinding is good for chip removal and cooling, not easy to jam, and not easy to burn the workpiece
6）easy sharping

► Customized cutting, grinding, sharpening, brazing, regrind and retipped solution and service
► Bonded: vitrified bond, resin bond, metal bond
► Model: diamond cup wheel (6A2, 11A2, 1A2)

► Width: 3mm – 20mm
► Grain Size up to super finish #3000
► Cutting-edge chipping <5 μm

Bonded of Grinding Wheel: resin diamond & cbn wheel, electroplated diamond & cbn wheel
4 axis CNC tool grinding wheel is used for grinding , sharpening and regrinding drill (2 tips, 3 tips), milling cutter, tap (2 tips, 3 tips, 4tip), reamer (4tips, 6tips, 8tips), carving cutter and gun drill, etc