electroplated diamond and cbn wheels factory

Feartures Of Diamond Burs, Diamond Mounted Points
* With different sizes and coarseness* Various shapes include, bullet, cone,round cylinder,barrel, flat top cylinder and dental, etc
* Fit Dremel type and rotary tools
* High grinding effect and long using life
* Convenient to grind, simple to use, safe and reliable
* No dust pollution, high performance ratio

Feartures Of Diamond Burs, Diamond Mounted Points
* With different sizes and coarseness* Various shapes include, bullet, cone,round cylinder,barrel, flat top cylinder and dental, etc
* Fit Dremel type and rotary tools
* High grinding effect and long using life
* Convenient to grind, simple to use, safe and reliable
* No dust pollution, high performance ratio

• To shape grinding wheels in the shortest possible time
• Profiling of the grinding wheel in only one operation using the plunge-cut dressing method
• Extreme accuracy, even with highly complex profile contours
• Highest cost-effectiveness

Application: sculpturing, dressing and internal grinding carbide, ceramic,glass, stones, marble,etc

Types of internal grinding wheel:
* vitrified cbn internal grinding wheel
* resin diamond & cbn internal wheel
* electroplated diamond mounted points
* abrasive internal grinding wheel

► Application: Grinding engine valves (inlet valves and exhaust valves) in cars, motorcycles, trucks, and other engine valves
► Speed of CBN Wheel: 80-140 m/s
► No need to dress

Electroplated （galvanic）CBN profile grinding wheels are used for sharpening high-alloy bandsaw.
CBN grinding wheels are commonly used to process band saws brands, including:
Wood-Mizer, Timberwolf, Simonds, Kasco, Morse, Lenox, Dakin Flathers/Ripper 37 and others

Electroplated bond grinding wheels have characteristics of high grain density, sharp grinding, high efficiency, good precision, without dressing etc. The product can be made with various shapes and they are suitable for special complicated profile, super-thin, especially small and other form grinding which have strict requirement on geometry shape and dimension.

— High-precision, high-efficiency
— Center-going, step-difference forming external cylindrical grinding
— The punches and needles are rough and finely ground at one time, and the finish is high
— With less frequent dressing in the case of vitrified CBN wheels or without dressing in the case of plated CBN wheels

Electroplated tools consist of a single layer of super abrasive grains (Diamond or CBN) fixed on the blank by a nickel galvanic process. The thickness of the nickel-coating is always around half of the diameter of the diamond.
Electroplated bond grinding wheels are mainly used for machining tungsten carbide, ceramics, glass, composite, sapphire, high-speed steel, tool steel, mold steel, stainless steel, cast iron, and so on.

Main Features
1. free cutting action
2. sharp grinding

3. high removal rate
4. good precision
5. without dressing

More SuperHard can provide super abrasive tools for machining engines, chassis and transmission components in all kinds of industries.
Our products can be customized according to customer needs.

Solid Steel Concave Diamond Grinding Wheel: 4″ in Diameter x 1/2″ Wide, 1″ Hole. Order optional bushings if you have a 1/2″, 5/8″ or 3/4″ arbor (for this wheel order one 1/2″ wide bushings to make the 1/2″ span across the hole).
High-quality nickel-plated diamond on steel.
Grit sizes available: 80, 120, 220, 400, & 600 grit

► Applications: polishing and faceting gemstones (jade, crystal, agate), spinel, sapphire, jewelry, glass artwork, and precision machining industry
► Bonded: resin bond, electroplated bond
► The grain size up to #15000
Features
Backed by a strong Aluminum base, these laps have a sturdy construction and last long.
Perfect for polishing soft gemstones.
Perfectly flat and parallel to the surface to ensure great balance and accuracy.

► Applications: polishing and faceting gemstones (jade, crystal, agate), spinel, sapphire, jewelry, glass artwork, and precision machining industry
► Bonded: resin bond, electroplated bond
► The grain size up to #15000
Features
Backed by a strong Aluminum base, these laps have a sturdy construction and last long.
Perfect for polishing soft gemstones.
Perfectly flat and parallel to the surface to ensure great balance and accuracy.

► Applications: polishing and faceting gemstones (jade, crystal, agate), spinel, sapphire, jewelry, glass artwork, and precision machining industry
► Bonded: resin bond, electroplated bond
► The grain size up to #15000
Features
Backed by a strong Aluminum base, these laps have a sturdy construction and last long.
Perfect for polishing soft gemstones.
Perfectly flat and parallel to the surface to ensure great balance and accuracy.

► Applications: polishing and faceting gemstones (jade, crystal, agate), spinel, sapphire, jewelry, glass artwork, and precision machining industry
► Bonded: resin bond, electroplated bond
► The grain size up to #15000
Features
Backed by a strong Aluminum base, these laps have a sturdy construction and last long.
Perfect for polishing soft gemstones.
Perfectly flat and parallel to the surface to ensure great balance and accuracy.

►It is used for grinding and cylindrical grinding of cemented carbide measuring tools, tungsten steel, high-speed steel, alloy steel, glass, precious stones, jade, jade, amber, beeswax, magnetic materials, ceramics, molds, etc..
►And can also be used for plunge grinding and forming Grinding is an ideal tool for grinding hard and brittle materials and hard alloys due to the characteristics of diamond abrasives (high hardness, high compressive strength, and good wear resistance).

►It is used for grinding and cylindrical grinding of cemented carbide measuring tools, tungsten steel, high-speed steel, alloy steel, glass, precious stones, jade, jade, amber, beeswax, magnetic materials, ceramics, molds, etc..
►And can also be used for plunge grinding and forming Grinding is an ideal tool for grinding hard and brittle materials and hard alloys due to the characteristics of diamond abrasives (high hardness, high compressive strength, and good wear resistance).

►It is used for grinding and cylindrical grinding of cemented carbide measuring tools, tungsten steel, high-speed steel, alloy steel, glass, precious stones, jade, jade, amber, beeswax, magnetic materials, ceramics, molds, etc..
►And can also be used for plunge grinding and forming Grinding is an ideal tool for grinding hard and brittle materials and hard alloys due to the characteristics of diamond abrasives (high hardness, high compressive strength, and good wear resistance).

Moresuperhard’s Electroplated CBN diamond grinding wheels for hip joint broach
► Body Type: steel core CBN wheel, aluminum core CBN wheel and plastic CBN wheel
► Diameter: 6 inches, 8 inches and 10 inch
► Thickness :1 inch, 1.5 inches and 2 inch
► Arbor hole:1/2 inch, 5/8 inch, 1-1/4 inch
► Radius edge: 1/4 inch
► Grain Size: 80#, 180#, 220#, 350#, 600#, 800#, 1200# etc.
Applicable grinder: sharpening woodturning tools (high-speed steel HSS) on a bench grinder
► Advantages: * Fast and cool cutting action without coolant
* No need to dress or turn

Moresuperhard’s Electroplated CBN diamond grinding wheels for hip joint broach
► Body Type: steel core CBN wheel, aluminum core CBN wheel and plastic CBN wheel
► Diameter: 6 inches, 8 inches and 10 inch
► Thickness :1 inch, 1.5 inches and 2 inch
► Arbor hole:1/2 inch, 5/8 inch, 1-1/4 inch
► Radius edge: 1/4 inch
► Grain Size: 80#, 180#, 220#, 350#, 600#, 800#, 1200# etc.
Applicable grinder: sharpening woodturning tools (high-speed steel HSS) on a bench grinder
► Advantages: * Fast and cool cutting action without coolant
* No need to dress or turn

Ball shape diamond coated, high abrasion resistance
Durable, and long service life, great for deburring and polishing
Used for sculpturing, dressing, precision grinding and internal grinding
Can be installed on the electronic, hanging mill, and hand electric drill
Widely used for metalwork, tool making, model engineering, wood carving, jewelry making, etc.
Material: Alloy and diamond
Shank Diameter: 6mm
Head Diameter: 12mm, 14mm, 16mm, 18mm, 20mm, 25mm
Shank Length: 35mm
Fine Gravel: 46 Grit
Coarse Gravel: 100 Grit
We support tailor-made products and services.

►Diamond coated head. Wear-resistant, close to the sand surface, not easy to fall off, maintains sharpness, long wear. 
►Its surface can be cleaned and restored to regain its original shape by using a dressing stone. 

►Can be installed on the electronic grinder, hanging mill and hand electric drill (not included here).
►Used for sculpturing, dressing, precision grinding and internal grinding carbide in ceramic, glass, precious stone, alloy and many other abrasive materials.
►Adding water when using the Diamond grinding head is good, can improve the sharpness and the life of the grinding needle.

►Material: Diamond
►Surface Treatment: As the picture shows
►Type: Bullet/Inverted Trapezoid/Ball/Round Head Cylinder/Flat Head Cylinder
►Tip Diameter：12mm 14mm 16mm 18mm 20mm 25mm or be customized.
►Shank Diameter：6mm, 6.35mm or be customized.

Application: sculpturing, dressing and internal grinding carbide, ceramic,glass, stones, marble,etc

Types of internal grinding wheel:
* vitrified cbn internal grinding wheel
* resin diamond & cbn internal wheel
* electroplated diamond mounted points
* abrasive internal grinding wheel

Electroplated grinding wheels is an excellent option when an aggressive amount of stock removal is required.

A single, uniform layer of diamond or CBN crystal is electroplated to a precision machined steel surface.

Application: sculpturing, dressing and internal grinding carbide, ceramic,glass, stones, marble,etc

Types of internal grinding wheel:
* vitrified cbn internal grinding wheel
* resin diamond & cbn internal wheel
* electroplated diamond mounted points
* abrasive internal grinding wheel

Application: single-stroke honing technology has been adopted in automobile, tractor, power machinery, construction machinery, refrigeration machinery and aerospace industry.
Hinge honing has the advantages of high efficiency, good surface quality and high dimensional consistency.

Application areas of diamond honing reamer
Hydraulic valves and valve bodies, distribution valves, Gears, ABS, brake cylinder, supercharger, rocker arms, connecting rod, parking pawls, crankcase, sprockets, powdered metal components, ceramic components.

Resin diamond grinding wheels are mainly used for grinding hard and brittle materials such as tungsten steel industry, cemented carbide industry, woodworking tool industry and die steel.
Rough grinding: 80# 100# 120#
Semi-finishing processing: 150# 180# 200# 240#
Fine grinding processing: 280# 320# 400# 500# 600# 800# 1000# 2000#

Electroplated Diamond grinding wheels:  Mainly used for machining nonmetallic materials with high rigidity like ceramics, glass, tungsten carbide, ferrite and so on
Electroplated CBN grinding wheels:Mainly used for machining metallic material such as chilled cast iron, founded alloy steel, titanium alloy and so on