Tungsten Carbide Grinding with 4B2 Resin Grinding Wheels

►Diamond coated head. Wear-resistant, close to the sand surface, not easy to fall off, maintains sharpness, long wear. 
►Its surface can be cleaned and restored to regain its original shape by using a dressing stone. 

►Can be installed on the electronic grinder, hanging mill and hand electric drill (not included here).
►Used for sculpturing, dressing, precision grinding and internal grinding carbide in ceramic, glass, precious stone, alloy and many other abrasive materials.
►Adding water when using the Diamond grinding head is good, can improve the sharpness and the life of the grinding needle.

Application: sculpturing, dressing and internal grinding carbide, ceramic,glass, stones, marble,etc

Types of internal grinding wheel:
* vitrified cbn internal grinding wheel
* resin diamond & cbn internal wheel
* electroplated diamond mounted points
* abrasive internal grinding wheel

PCD materials are mainly divided into three categories according to the particle size:
coarse particle size (20-50μm),
medium particle size (about 10μm)
fine particle size (-5μm).
The coarser the particle size, the more difficult it is to grind. The coarse particle size tends to be jagged after grinding. , The quality is poor, but the wear resistance is the strongest; the fine-grained grinding is easier, and the quality of the cutting edge after grinding is better.
Vitrified diamond grinding wheels are used for grinding pcd cbn carbide ceramic cermet cutting tools

Vitrified diamond grinding wheels are suitable for grinding, regrinding cutting tools (such as carbide, ceramic, cermet, pcd, pcbn, cvd, mcd)
Custom PCD tools, CBN tools, CVD diamond tools and Mono Crystal diamond tools cutting, brazing, grinding, sharpening, regrind and retipped service and solution.

Moresuperhard provides qualified services For DANOBAT’s Precision Grinding Machines.
Centerless grinding models：ESTARTA-175 / ESTARTA-250, ESTARTA-400 / ESTARTA-650

► Resind diamond/CBN grinding wheels
► Conventional grinding wheels
► Diamond dressing wheels

► Suitable for all kinds of electric grinders, lapping machines, etc., grinding, lapping, surface grinding, efficient and fast
► Suitable for sandblasting, agate, glass, mold, etc., polishing, engraving, edge grinding and sewing, etc., efficient and save a lot of time
► The focus of the diamond ball grinding head is engraving, U-shaped surface engraving and hollow engraving
► To ensure the life of the tool, cooling with water is required, as the diamond will undergo patterning and wear due to overheating.

Resin bond diamond & CBN grinding wheels have features of good self-sharpening, low heat generated during grinding, not easy to block and reduce the phenomenon of working burns during grinding. Resin bond has a certain elasticity and is conducive to improving the roughness of the workpiece surface, mainly used for fine grinding, semi-fine grinding, sharpening grinding, polishing and other processes. Therefore, resin bond diamond and CBN grinding wheels are widely used in the field of grinding and cutting.

Main Application
Resin bond grinding wheels have strong competitive advantages in the processing fields of carbide tools, ceramics, glass, PCBN tools, PDC cutter, Steel, cast iron, electronic information components precision cutting etc.

► Polishing and finishing of glass, LCD/LED substrates, precision optics, hard disk, metal and semiconductor wafer surfaces
► Model: MSH-66, MSH-77, MSH-13, MSH-LASER, MSH-46
► Thickness: 0.02″ (0.508 mm) – 0.20″ (5.08 mm)

Feartures Of Diamond Burs, Diamond Mounted Points
* With different sizes and coarseness* Various shapes include, bullet, cone,round cylinder,barrel, flat top cylinder and dental, etc
* Fit Dremel type and rotary tools
* High grinding effect and long using life
* Convenient to grind, simple to use, safe and reliable
* No dust pollution, high performance ratio

► Applications: face grinding, top grinding, flank grinding, hollow tooth grinding and re-sharpening for tungsten carbide tipped saw blades and one-piece HSS saws
► Models: 4A2, 4BT9, 11A2, 15A2, 12V2, 14F1, etc
► Bonded: Resin bond, vitrified bond
► Grinding Machine: Vollmer, Woodtronic, Akemat, Widma and so on

For Woodworking Industry, Resin bond Diamond and CBN Wheels are the best choices. The applications include sharpening and production grinding. With more than 10 years of experiences, Moresuperhard has developed the premium bonds for this application. We provide both standard specs and Custom made wheels.

1.Resin Bond Diamond wheel is to grind Tungsten Carbide tipped tools and saws.
2.Resin Bond CBN wheel is to grind the circular saws and band saws made from HSS,
tool steel, and Stellite type material.
3. Resin CBN wheel is to grind the tool made from the combination of Carbide and hardened Tool Steel.

6a9 Resin bonded diamond cbn grinding wheels are used for grinding tungsten carbide, HSS, milling cutter, reamer and drill, etc
CNC grinding machines include,Walter, Anca, Ewag, Vollmer, Rollomatic, Schutte, Schneeberger, Makino, TG-5, Stuer, Strausak, Cininnati, Griffo, Huffmann, Jungner

Moresuperhard provides a line of solution and services for ultra performance tools grinding on CNC machines. Our services include,
► Fluting
► Gashing clear edge and relief angle
► OD grinding of the tungsten carbide, HSS, milling cutter, reamer and drill, etc
Diamond and CBN wheels are available in resin bond and hybrid bond. The applicable machines include,Walter, Anca, Ewag, Vollmer, Rollomatic, Schutte, Schneeberger, Makino, TG-5, Stuer, Strausak, Cininnati, Griffo, Huffmann, Jungner

CBN wheels outperform common stone wheels in many ways. Features: Made from a steel core and will run smoother on all grinders.
NO WEAR – CBN wheels retain their shape and size so no resetting of your jigs.
FINE AND EVEN FINISH TO WOODTURNING TOOLS – 180 grit gives a fine and even finish to your tools with only light pressure required.
NO BURNT OR BLUE EDGES – Cool cutting provides no burnt or blue edges with a smooth grinding experience from 100 to 3500 RPM.
NO DRESSING OR CONDITIONING REQUIRED – A CBN wheel is designed for sharpening high speed steels and will withstand the friction from grinding with much less heat produced than a diamond wheel.

Flute grinding wheels are specially engineered high density (near zero porosity), resin bonded wheels which ensure that the form is generated with utmost precision and finesse.
Features Of Flute Grinding Wheel
* High intensityperipheral speed 80m/s
* Anti-impact:bearing larger grinding pressure
* Suitable self-sharpening:larger remove grinding without burning
* Excellent balance:no vibration cracks

► Application: grinding various precision ceramic

► Bonded: resin bond & vitrified bond

► Correct choice of grain size and bonded
* Usually rough grinding uses D126, D91 (Resin bond &Vitrified bond)
* Semi-rough grinding uses D76, D64, D54, D46 (Resin bond & Vitrified bond)
* Semi-finish grinding uses D25, D20 (Resin bond &Vitrified bond)
* Finishing grinding uses D15 (Resin bond)
* Super finishing uses D7, D1 (Resin bond)s diamond & CBN wheels for carbide, HSS, PCD, PCBN machining according to customers’ requirements and FEPA Standard.

Resin bond diamond & CBN grinding wheels have features of good self-sharpening, low heat generated during grinding, not easy to block and reduce the phenomenon of working burns during grinding. Resin bond has a certain elasticity and is conducive to improving the roughness of the workpiece surface, mainly used for fine grinding, semi-fine grinding, sharpening grinding, polishing and other processes. Therefore, resin bond diamond and CBN grinding wheels are widely used in the field of grinding and cutting.

► OD cylindrical grinding wheel (1A1 shape)
► Diamond sanding belts
► Diamond internal grinding wheel
► Diamond honing stone
Model: 1A1 diamond wheel (diameter up to 1100mm)

Moresuperhard’s Electroplated CBN diamond grinding wheels for hip joint broach
► Body Type: steel core CBN wheel, aluminum core CBN wheel and plastic CBN wheel
► Diameter: 6 inches, 8 inches and 10 inch
► Thickness :1 inch, 1.5 inches and 2 inch
► Arbor hole:1/2 inch, 5/8 inch, 1-1/4 inch
► Radius edge: 1/4 inch
► Grain Size: 80#, 180#, 220#, 350#, 600#, 800#, 1200# etc.
Applicable grinder: sharpening woodturning tools (high-speed steel HSS) on a bench grinder
► Advantages: * Fast and cool cutting action without coolant
* No need to dress or turn

Resin diamond wheels are used for tungsten carbide tools, automotive glass, PDC, PCD, PCBN, ceramics, sapphire, optical glass, and magnetic materials.
Resin bond diamond grinding wheel features a small grinding force, less grinding heat, good self-sharpening, high efficiency, and high surface finish. It is mainly used for cutting, finish grinding, semi-finish grinding, sharpening, and polishing.

The Wheel Dresser is designed to provide easy and efficient dressing of diamond /CBN grinding wheels and grinding wheel spindles consisting of several grinding wheels.
►Diamond & CBN wheel dressing machine Models NM-X3 NM-X5 NM-X6
►Applications: -Dressing diamond /CBN grinding wheels -Dressing flat, side, angular, external and profile wheels -Single and multiple wheel combinations

Resin Bond diamond and CBN grinding wheels are made of either phenolic or polyimide resins. Pressure and heat are utilized to bond the resin to our grinding wheel cores.
Moresuperhard’s phenolic bonded wheels can be utilized in dry or wet applications.
Our polyimide bonded wheels are best utilized in water or oil-based coolants for improved form holding, typically required in CNC tool and cutter applications.
Moresuperhard produces wheel sizes from 1in. (25mm) to 28 inches (720mm) and grit sizes from 40 to 3000 are available.

► Application: grinding carbide and HSS. (such as drill, end mill, reamer)
► A complete solution for CNC tools manufacturing: fluting, gashing and Clear edge, relief angle grinding, OD grinding
► Model: 1A1, 1V1, 11V9, 12V9, 14A1, 12V5, etc

The bond strength of this type of diamond grinding wheel is weaker than that of other wheels. The self-sharpening for carbide saw blade is better, no blocking.
Diamond and CBN wheels for sharpening circular saw blades (TC, HSS)
Models of grinding wheel: 4A2, 4BT9, 4A9, 3A1, 14A1, 6V5, 6A2, 1A8W, 14F1, etc
CNC machines: Vollmer, Woodtronic, Akemat, Widma and so on

Characteristics of CNC Cylindrical Grinder
• The grinding wheel spindle has high rigidity, high precision, high service life and low vibration and low friction
• The self-aligning function, the wheel spindle is not affected by the belt tension and is biased
• The spindle has a centering and simultaneous compound function, and the user can perform rapid conversion in the core machining and the chuck clamping process.
• The Z-axis consists of an AC servo motor, a high-precision bead screw, and an automatic forced lubrication system
• High repeatability. long track service life, high rigidity and smooth reciprocating motion
• Configurable surface measurement, outer diameter thickness measurement, grinding wheel anti-collision device