Diamond Grinding Wheels For Sharpening Carbide Saw Blades

► Grinding Indexable inserts (tungsten carbide inserts, ceramic inserts, CBN inserts)
► Model: 6A2T, 6A2M, 11A2B, 12A2T
► Grinding Machine: WENDT, WAIDA, AGATHON, EWAG, COBORN, etc.

► Applications: face grinding, top grinding, flank grinding, hollow tooth grinding and re-sharpening for tungsten carbide tipped saw blades and one-piece HSS saws
► Models: 4A2, 4BT9, 11A2, 15A2, 12V2, 14F1, etc
► Bonded: Resin bond, vitrified bond
► Grinding Machine: Vollmer, Woodtronic, Akemat, Widma and so on

► Bond: Metal nickel plating electroplated bond & Resin bond (resin bond also consists of flexible and hard type)
► Length: 150mm – 5000m
► Width: 5mm – 350mm
► Grit: #60,#100,#120,#200,#400,#800,#1500,#2000,#3000,#5000

■ Due to its self-sharpening, the resin bond wheel is easy to use and is suitable for roughing – finishing.
■ Due to moderate abrasive holding strength and wear resistance, this wheel is suitable for roughing with free cutting.
■ Due to elasticity, this wheel using fine grits is suitable for finishing.

► Good concentricity, less runout, small tolerance
► Round hole/Face/Square hole/Arc/Groove/ Spherical/ contour grinding
► Bond: resin bond/ electroplated/ vitrified
► Grinding machine: Moore, Hauser, Mitsuiseiki, Waida and Jingtian, etc.
► Grit：40 #-1000#

A hydraulic tappet is a device for maintaining zero valve clearance in an internal combustion engine. We can offer diamond internal grinding wheels (PA, SG), CBN internal grinding wheel, and diamond internal grinding wheels for hydraulic tappets/hydraulic valve lifters grinding.

Details about Moresuperhard’s internal grinding wheels:

► Application: inner grinding of bearing, compressor, CVJ ball-cage, hydraulic tappets, universal joint, stator and rotor .
► Body type: ID Wheel with Shank, ID Wheel without Shank
► Model type: 1A8, 1A1W, 1A1, DWA

Resin diamond wheels for grinding tungsten carbide and HSS steel. Such as drills, end mills, reamers, micro drills, mini end mills and burrs, etc
Suitable CNC Grinding Machine: ANCA,WALTER,SCHUTTE,EWAG,SCHNEEBERGER,HUFFMANN and so on.
Diamond Fluting Grinding (1A1, 3A1, 14A1, 1V1)

► Applications: polishing and faceting gemstones (jade, crystal, agate), spinel, sapphire, jewelry, glass artwork, and precision machining industry
► Bonded: resin bond, electroplated bond
► The grain size up to #15000
Features
Backed by a strong Aluminum base, these laps have a sturdy construction and last long.
Perfect for polishing soft gemstones.
Perfectly flat and parallel to the surface to ensure great balance and accuracy.

► Application: grinding various precision ceramic
► Bonded: resin bond & vitrified bond
► Correct choice of grain size and bonded
* Usually rough grinding uses D126, D91 (Resin bond &Vitrified bond)
* Semi-rough grinding uses D76, D64, D54, D46 (Resin bond & Vitrified bond)
* Semi-finish grinding uses D25, D20 (Resin bond &Vitrified bond)
* Finishing grinding uses D15 (Resin bond)
* Super finishing uses D7, D1 (Resin bond)

► Applications: polishing and faceting gemstones (jade, crystal, agate), spinel, sapphire, jewelry, glass artwork, and precision machining industry
► Bonded: resin bond, electroplated bond
► The grain size up to #15000
Features
Backed by a strong Aluminum base, these laps have a sturdy construction and last long.
Perfect for polishing soft gemstones.
Perfectly flat and parallel to the surface to ensure great balance and accuracy.

— High-precision, high-efficiency
— Center-going, step-difference forming external cylindrical grinding
— The punches and needles are rough and finely ground at one time, and the finish is high
— With less frequent dressing in the case of vitrified CBN wheels or without dressing in the case of plated CBN wheels

► Suitable for all kinds of electric grinders, lapping machines, etc., grinding, lapping, surface grinding, efficient and fast
► Suitable for sandblasting, agate, glass, mold, etc., polishing, engraving, edge grinding and sewing, etc., efficient and save a lot of time
► The focus of the diamond ball grinding head is engraving, U-shaped surface engraving and hollow engraving
► To ensure the life of the tool, cooling with water is required, as the diamond will undergo patterning and wear due to overheating.

► Model: 1A1R, 1A1, 3A1, 1V1, 4A2, 4BT9, 6A2, 11V9, 12A2, 14F, etc
► Workpiece Materials: grinding tungsten carbide cutting tools, ceramic , magnetic materials, silicon , sapphire, glass , quartz and HVOF carbide coated,PCD, PCBN, etc
► Applicable Industry: carbide inserts (cnc tools), carbide circular saw (woodworking tools), Thermal Spraying Coated, Silicon Wafer Grinding, etc

More SuperHard provides a line of solution and services for ultra performance cnc cutting tools grinding on CNC machines. Our services include fluting, gashing clear edge and relief angle, OD grinding of the tungsten carbide, HSS, milling cutter, reamer and drill, etc
Our Diamond and CBN wheels are available in resin bond and hybrid bond. The applicable cnc machines include,Walter, Anca, Ewag, Vollmer, Rollomatic, Schutte, Schneeberger, Makino, TG-5, Stuer, Strausak, Cininnati, Griffo, Huffmann, Jungner

► Edge wheel for silicon and sapphire wafer edge grinding. A small diameter wheel is used for notch grinding
► Metal diamond wheel for rough grinding to get an accurate edge profile
► Resin diamond wheel for finish grinding to get good surface roughness

► Vitrified bond and Resin bond: vitrified bond has a longer lifespan and higher efficiency than resin bond
► Used for the cylindrical grinding of tungsten carbide
► Models: 6A2(Diameter: 100mm-1200mm)

Electroplated tools consist of a single layer of super abrasive grains (Diamond or CBN) fixed on the blank by a nickel galvanic process. The thickness of the nickel-coating is always around half of the diameter of the diamond.
Electroplated bond grinding wheels are mainly used for machining tungsten carbide, ceramics, glass, composite, sapphire, high-speed steel, tool steel, mold steel, stainless steel, cast iron, and so on.

Main Features
1. free cutting action
2. sharp grinding

3. high removal rate
4. good precision
5. without dressing

Resin diamond and cbn wheels are used for grinding, sharpening drill (2 tips, 3 tips), milling cutter, tap (2 tips, 3 tips, 4tip), reamer (4tips, 6tips, 8tips), carving cutter and gun drill, etc
The materials of workpiece: tungsten carbide, high speed steel (Hss)
The bonded: resin bond , electroplated bond

► Application: grinding various precision ceramic

► Bonded: resin bond & vitrified bond

► Correct choice of grain size and bonded
* Usually rough grinding uses D126, D91 (Resin bond &Vitrified bond)
* Semi-rough grinding uses D76, D64, D54, D46 (Resin bond & Vitrified bond)
* Semi-finish grinding uses D25, D20 (Resin bond &Vitrified bond)
* Finishing grinding uses D15 (Resin bond)
* Super finishing uses D7, D1 (Resin bond)s diamond & CBN wheels for carbide, HSS, PCD, PCBN machining according to customers’ requirements and FEPA Standard.

► Applications: polishing and faceting gemstones (jade, crystal, agate), spinel, sapphire, jewelry, glass artwork, and precision machining industry
► Bonded: resin bond, electroplated bond
► The grain size up to #15000
Features
Backed by a strong Aluminum base, these laps have a sturdy construction and last long.
Perfect for polishing soft gemstones.
Perfectly flat and parallel to the surface to ensure great balance and accuracy.

Moresuperhard provides qualified services For DANOBAT’s Precision Grinding Machines.
Centerless grinding models：ESTARTA-175 / ESTARTA-250, ESTARTA-400 / ESTARTA-650

► Resind diamond/CBN grinding wheels
► Conventional grinding wheels
► Diamond dressing wheels

The bond strength of this type of diamond grinding wheel is weaker than that of other wheels. The self-sharpening for carbide saw blade is better, with no blocking.
Diamond and CBN wheels for sharpening circular saw blades (TC, HSS)
Models of grinding wheel: 4A2, 4BT9, 4A9, 3A1, 14A1, 6V5, 6A2, 1A8W, 14F1, etc
CNC machines: Vollmer, Woodtronic, Akemat, Widma and so on

►High Precision Centerless Grinding Machines Models:
-FX12S
-FX18S/AS/BS
-FX18HS(Static Pressure Spindle)
-FX20S

►Broad Applications:
-Automotive Industry: shafts, pins, valves, and bearings
-Aerospace Industry: turbine shafts, landing gear components, and fuel system parts
-Medical Industry
-Tool and Die Industry
-Bearings industry
-Tool and Die Industry: cutting tools, punches, and dies with high accuracy and surface quality

High Precision with High Rigidity Body Structure

Type: 1A1 & 1A1R
Application: cutting tungsten carbide, alloys, quartz, ceramics, glass, carbon fibre composites, fiber glass, HSS, Hardened Steel and other ferrous material.

Moresuperhard provides a line of solution and services for ultra performance cutting tools grinding on CNC machines. Our services include,
► Fluting
► Gashing clear edge and relief angle
► OD grinding of the tungsten carbide, HSS, milling cutter, reamer and drill, etc
Diamond and CBN wheels are available in resin bond and hybrid bond. The applicable machines include,Walter, Anca, Ewag, Vollmer, Rollomatic, Schutte, Schneeberger, Makino, TG-5, Stuer, Strausak, Cininnati, Griffo, Huffmann, Jungner

Film belt is for grinding steel, stone, glass, ceramics, mono crystalline silicon, polysilicon, zirconia, alumina, metal-nonmetallic synthetic materials, cemented carbide, aluminum-magnesium alloy, aluminum beryllium alloy, titanium alloy and etc. hard brittle materials.

Moresuperhard provides qualified services For DANOBAT’s Precision Grinding Machines.
Centerless grinding models：ESTARTA-175 / ESTARTA-250, ESTARTA-400 / ESTARTA-650

► Resind diamond/CBN grinding wheels
► Conventional grinding wheels
► Diamond dressing wheels

►Model: Tool Grinding Motorized Spindle, Double Head Grinding Spindle, Automatic Grinding Wheel Replacement Grinding Spindle, High-frequency Peel Grinding Spindle, Grinding Wheels Dressing Spindle, High-speed Internal Grinding Electric Spindle
►Features: Low vibration and high efficiency, easily used and installed, precision angular ball bearing to ensure the rotation accuracy and useful life
►Pre-fill grease to provide lubrication of the spindle
►Applications: surface grinding machine, cylindrical grinding machine, internal grinding machine

CBN wheels outperform common stone wheels in many ways. Features: Made from a steel core and will run smoother on all grinders.
NO WEAR – CBN wheels retain their shape and size so no resetting of your jigs.
FINE AND EVEN FINISH TO WOODTURNING TOOLS – 180 grit gives a fine and even finish to your tools with only light pressure required.
NO BURNT OR BLUE EDGES – Cool cutting provides no burnt or blue edges with a smooth grinding experience from 100 to 3500 RPM.
NO DRESSING OR CONDITIONING REQUIRED – A CBN wheel is designed for sharpening high speed steels and will withstand the friction from grinding with much less heat produced than a diamond wheel.