Electroplated CBN Sharpening Grinding Wheels for Scissor/Kitchen Knife Sharpening

► Application: Grinding engine valves (inlet valves and exhaust valves) in cars, motorcycles, trucks, and other engine valves
► Speed of CBN Wheel: 80-140 m/s
► No need to dress

Applications: face grinding, top grinding, flank grinding, hollow tooth grinding and re-sharpening for tungsten carbide tipped saw blades and one-piece HSS saws.
Models: 4A2, 4BT9, 11A2, 15A2, 12V2, 14F1, etc
Bonded: Resin bond, vitrified bond
Grinding Machine: Vollmer, Woodtronic, Akemat, Widma and so on

Resin diamond wheels for grinding tungsten carbide and HSS steel. Such as drills, end mills, reamers, micro drills, mini end mills and burrs, etc
Type: 1A1,1V1,1A1R,6A2,6A9,3A1,9A1,11V9,12A2,14A1 etc.   
Moresuperhard has more than 15 years’ experience in producing diamond and cbn grinding wheels.

The diamond resin grinding wheel has a good polishing effect. The grinding wheel is sharp and not easy to be blocked during grinding.
The specific characteristics are as follows:
1. The grinding efficiency is high, and the grinding wheel consumption is relatively slow;
2. Good self-sharpening, low heat generation during grinding, not easy to block, reducing the phenomenon of work burns during grinding;
3. The grinding wheel has a certain elasticity, which is conducive to improving the roughness of the workpiece surface. It is mainly used for fine grinding, semi-fine grinding, knife grinding, polishing and other processes;
4. The diamond resin grinding wheel is cured at low temperature, the production cycle is short, and the equipment and supply process is relatively simple; due to the fluidity of the resin, it is easy to form a grinding wheel with complex surfaces

Brazing diamond tool is a tool product which solders a layer of diamond firmly on the metal matrix through the melting process of metal solder. This kind of product has the characteristics of higher efficiency, the long service life of a single diamond particle and high grinding accuracy. The main products cover all coarse and medium-sized electroplated diamond tools and some hot-pressed diamond tools.
In order to avoid the problems of low holding power, small chip space, low exposure height and easy falling off caused by traditional manufacturing methods, and to make greater use of the advantages of single-layer diamond tools, brazing technology has been applied to the field of diamond tools manufacturing since 2000 and has developed rapidly. Brazing technology, as a new manufacturing method of diamond tools, has attracted wide attention all over the world.

Resin diamond wheels are used for tungsten carbide tools, automotive glass, PDC, PCD, PCBN, ceramics, sapphire, optical glass, and magnetic materials.
Resin bond diamond grinding wheel features a small grinding force, less grinding heat, good self-sharpening, high efficiency, and high surface finish. It is mainly used for cutting, finish grinding, semi-finish grinding, sharpening, and polishing.

More Superhard provides precise solutions for cylindrical grinding PDC cutter, repairing PDC drill bits in Oil & Gas industry. We can supply diamond tools include,
► Vitrified Diamond Wheel for Cylindrical Grinding PDC Cutter / PDC Drill Bits
► Resin Diamond Wheel for Cylindrical Grinding PDC Cutter / PDC Drill Bits
► Cylindrical Diamond Wheel for PDC Cutter chamfer grinding
Model: 1A1,14A1 diamond wheel (diameter up to 1100mm)

► Steady drilling with better smoothness
► Free drilling and long lifespan
► No damage to the edge
► High drilling efficiency

— Applications: face grinding, top grinding, flank grinding, hollow tooth grinding and re-sharpening for tungsten carbide tipped saw blades and one-piece HSS saws
— Models: 4A2, 4BT9, 11A2, 15A2, 12V2, 14F1, etc
— Bonded: Resin bond, vitrified bond
— Grinding Machine: Vollmer, Woodtronic, Akemat, Widma and so on

► Suitable for all kinds of electric grinders, lapping machines, etc., grinding, lapping, surface grinding, efficient and fast
► Suitable for sandblasting, agate, glass, mold, etc., polishing, engraving, edge grinding and sewing, etc., efficient and save a lot of time
► The focus of the diamond ball grinding head is engraving, U-shaped surface engraving and hollow engraving
► To ensure the life of the tool, cooling with water is required, as the diamond will undergo patterning and wear due to overheating.

Features:
High precision and efficiency grinding performance.
Long service life, meaning that the wheels will not wear out quickly.
Good thermal stability, ensuring that the wheels maintain their shape and size.
Chemically stable and corrosion-resistant materials are used, ensuring that the wheels do not rust or corrode.
The wheels are designed to be lightweight and easy to use.

Application: carbide, tungsten steel, vitrified optical glass, sapphire glass, high-speed steel, bearing steel, tool steel, stainless steel, and cast iron, etc
► Bond: vitrified bond & resin bond
► Diameter: 300- 1500mm

► Provide matching dressing grinding wheel
►Diamond & CBN shapes: cylindrical, hexagonal, square, segmented
► Grinding machines: Wendt WBM, Viotoo, AMT, Stahli, Peter Wolters, Diskus, Agathon T&B, Fujisanki, Supfina, Melchiorre, Koyo, Lam Plan, Speedfam, Kemet, Gardner and other brands.

Silicon wafer back grinding, resin/vitrified bond diamond wheels are used for back thinning, grinding and fine grinding of apphire epitaxial wafer, silicon wafer, gallium arsenide and GaN wafer

► Application: inner grinding of bearing, compressor, CVJ ball-cage, hydraulic tappets, universal joint, stator and rotor .
► Body type: ID Wheel with Shank, ID Wheel without Shank
► Model type: 1A8, 1A1W, 1A1, DWA
► We can offer: abrasive internal grinding wheel (PA, SG), CBN internal grinding wheel, Diamond internal grinding wheel

Application: sculpturing, dressing and internal grinding carbide, ceramic,glass, stones, marble,etc

Types of internal grinding wheel:
* vitrified cbn internal grinding wheel
* resin diamond & cbn internal wheel
* electroplated diamond mounted points
* abrasive internal grinding wheel

• To shape grinding wheels in the shortest possible time
• Profiling of the grinding wheel in only one operation using the plunge-cut dressing method
• Extreme accuracy, even with highly complex profile contours
• Highest cost-effectiveness

Flute grinding wheels are specially engineered high density (near zero porosity), resin bonded wheels which ensure that the form is generated with utmost precision and finesse.
Features Of Flute Grinding Wheel
* High intensityperipheral speed 80m/s
* Anti-impact:bearing larger grinding pressure
* Suitable self-sharpening:larger remove grinding without burning
* Excellent balance:no vibration cracks

Vitrified bond CBN Grinding Wheel is suitable for high-efficient heavy grinding of a camshaft of automobile parts. The wheel speed is 80m/s-160m/s, designed to be used on CNC Cam Grinders like Toyoda, Schaudt, Landis, Junker, etc.
Application: inner grinding of bearing, compressor, CVJ ball-cage, hydraulic tappets, universal joint, stator and rotor.

Thickness and Grit : customered
For grinding and polishing jewelry, glass, rock,stone, granite,etc.
Recommended for rough and fine grinding on faceting material plus general lapidary grinding when precision is required.

With hydrostatic liquid suspension electric spindle, high rigidity, high speed, low vibration, high grinding force.
►Servo Surface CNC cylindrical grinder Models
GP32
J2
►Applications:
– automotive and aerospace industries,
– tool manufacturing
– die makingn

Film belt is for grinding steel, stone, glass, ceramics, mono crystalline silicon, polysilicon, zirconia, alumina, metal-nonmetallic synthetic materials, cemented carbide, aluminum-magnesium alloy, aluminum beryllium alloy, titanium alloy and etc. hard brittle materials.

Selected diamond abrasive grains
Resin bond which has high precision
Diameter 125mm, Hole 20mm Grit 150#
Used for tungsten carbide, optical glass, gem
Default grit is 150#, Customized shape size and grit is available.

► Steady drilling with better smoothness
► Free drilling and long lifespan
► No damage to the edge
► High drilling efficiency

► Model: 1A1R, 1A1, 3A1, 1V1, 4A2, 4BT9, 6A2, 11V9, 12A2, 14F, etc
► Workpiece Materials: grinding tungsten carbide cutting tools, ceramic , magnetic materials, silicon , sapphire, glass , quartz and HVOF carbide coated,PCD, PCBN, etc
► Applicable Industry: carbide inserts (cnc tools), carbide circular saw (woodworking tools), Thermal Spraying Coated, Silicon Wafer Grinding, etc