14F1/6A9 Resin bond diamond wheels for tungsten carbide circular saw blade

Grain size selection of vitrified diamond grinding wheel
► W40(500# D35) W28(D20) Rough Grinding.
► W20 (800# -1000#, D20) Universal Grinding.

► W10 (1500# D15A) W7 (2000# D15B) Finish Grinding.
► W5 (3000# D7) W3.5 (4000# D3) Super Finish Grinding.
Vitrified diamond grinding wheels for grinding PCD & PCBN cutting tools, CVD tools, MCD tools, milling cutter, reamer, drill and regrinding, etc

Good self-sharpening and superb grinding efficiency
D750*H305&T75*X10mm
Good for grinding and processing hard and brittle materials such as ceramics, glass and tungsten carbide.

More superhard provides a line of solution and services for ultra performance tools grinding on CNC machines. Our services include,
► Fluting
► Gashing clear edge and relief angle
► OD grinding of the tungsten carbide, HSS, milling cutter, reamer and drill, etc
Our Diamond and CBN wheels are available in resin bond and hybrid bond. The applicable machines include,Walter, Anca, Ewag, Vollmer, Rollomatic, Schutte, Schneeberger, Makino, TG-5, Stuer, Strausak, Cininnati, Griffo, Huffmann, Jungner

Brazing diamond tool is a tool product which solders a layer of diamond firmly on the metal matrix through the melting process of metal solder. This kind of product has the characteristics of higher efficiency, the long service life of a single diamond particle and high grinding accuracy. The main products cover all coarse and medium-sized electroplated diamond tools and some hot-pressed diamond tools.
In order to avoid the problems of low holding power, small chip space, low exposure height and easy falling off caused by traditional manufacturing methods, and to make greater use of the advantages of single-layer diamond tools, brazing technology has been applied to the field of diamond tools manufacturing since 2000 and has developed rapidly. Brazing technology, as a new manufacturing method of diamond tools, has attracted wide attention all over the world.

— High-precision, high-efficiency
— Center-going, step-difference forming external cylindrical grinding
— The punches and needles are rough and finely ground at one time, and the finish is high
— With less frequent dressing in the case of vitrified CBN wheels or without dressing in the case of plated CBN wheels

Moresuperhard provides qualified services For DANOBAT’s Precision Grinding Machines.
Centerless grinding models：ESTARTA-175 / ESTARTA-250, ESTARTA-400 / ESTARTA-650

► Resind diamond/CBN grinding wheels
► Conventional grinding wheels
► Diamond dressing wheels

►Excellent Grinding Action
►less apt to experience loading, and they dress easily for added convenience
►Convenience and Ease of Use
►Grinding abilities apply to both wet and dry tasks on processing objects such as harden steel, glass, ceramic, carbide alloys, ferrite, refractories, semi conductors, and other electrical carbon products.

► Diamond & CBN honing stone, honing stick
► Bonded: metal bond
► Materials of workpiece: carbide,glass and ceramic,cast iron,alloy steel, tool steel, die steel, hardened steel copper, aluminum alloy and other abrasive resistant materials
► Applicable areas: fine grinding engine pump body, hydraulic cylinder bore, hydraulic pump inner bore, cylinder block, valve,oil cylinder nozzle, the inner surface of the spline bore and cylinder hole and blind hole of other series.

►High Efficiency
►Long Lifespan
►Wide Range of Applications
►Consistent Performance:
►Low Maintenance

1.Resin Bond Diamond wheel is to grind Tungsten Carbide tipped tools and saws.
2.Resin Bond CBN wheel is to grind the circular saws and band saws made from HSS,
tool steel, and Stellite type material.
3. Resin CBN wheel is to grind the tool made from the combination of Carbide and hardened Tool Steel.

Resin diamond wheels for grinding tungsten carbide and HSS steel. Such as drills, end mills, reamers, micro drills, mini end mills and burrs, etc
Type: 1A1,1V1,1A1R,6A2,6A9,3A1,9A1,11V9,12A2,14A1 etc.   
Moresuperhard has more than 15 years’ experience in producing diamond and cbn grinding wheels.

► Bonded: resin bonded
► Application: precision grinding micro drill tools
Advantages of micro tool grinding wheel:
* Good edge stability
* High cutting efficiency
* Minimal reject-part rates
* Good round tool quality

► Bonded: vitrified bond, resin bond, metal bond
► Width: 1mm – 20mm
► Up to #10000 for super finish
► Cutting-edge chipping <5 μm ► Provide dressing wheel to dress PCD grinding wheel

Vitrified CBN internal grinding wheels are made of cubic boron nitride abrasives and sintered with metal powder, resin powder and ceramic as a bonding agent to form various shapes of abrasives for industrial grinding, polishing and lapping.

Thickness and Grit : customered
For grinding and polishing jewelry, glass, rock,stone, granite,etc.
Recommended for rough and fine grinding on faceting material plus general lapidary grinding when precision is required.

– Metal diamond wheel for rough grinding to get accurate edge profile
– Grinded with uniform chamfer width, excellent rigidity
– Strong groove shape retention, long life
– By edge grinding the final diameter is adjusted
– A uniform CBN layer minimizes machining damage
– Highly precise slotted shape support various wafer shapes
It is suitable for making guide vanes and nozzle guide vanes for aviation jet engines, industrial gas turbines, naval gas turbines, and diesel engine nozzles.

Diamond Stones:
Harder than all other abrasives
Use with lubricant (water, glass cleaner, Krud Kutter)
Materials: micronized monocrystalline diamonds
Grit range: 120-8000
Costs: $20 – $100
Common Size: 2″x6″, 3″x8″, 4″x10″

► Application: harder alloys, ceramics and cermet.
► Bonded: resin bond

Moresuperhard provides qualified services For DANOBAT’s Precision Grinding Machines.
Centerless grinding models：ESTARTA-175 / ESTARTA-250, ESTARTA-400 / ESTARTA-650

► Resind diamond/CBN grinding wheels
► Conventional grinding wheels
► Diamond dressing wheels

More SuperHard provides a line of solution and services for ultra performance cnc cutting tools grinding on CNC machines. Our services include fluting, gashing clear edge and relief angle, OD grinding of the tungsten carbide, HSS, milling cutter, reamer and drill, etc
Our Diamond and CBN wheels are available in resin bond and hybrid bond. The applicable cnc machines include,Walter, Anca, Ewag, Vollmer, Rollomatic, Schutte, Schneeberger, Makino, TG-5, Stuer, Strausak, Cininnati, Griffo, Huffmann, Jungner

Qualified film belts and belt sander are on sale!

► Bond: Metal nickel plating electroplated bond & Resin bond (resin bond also consists of flexible and hard type)
► Length: 150mm – 5000mm
► Width: 5mm – 350mm
► Grit: #60,#100,#120,#200,#400,#800,#1500,#2000,#3000,#5000

Resin Bond diamond and CBN grinding wheels are made of either phenolic or polyimide resins. Pressure and heat are utilized to bond the resin to our grinding wheel cores.
Moresuperhard’s phenolic bonded wheels can be utilized in dry or wet applications.
Our polyimide bonded wheels are best utilized in water or oil-based coolants for improved form holding, typically required in CNC tool and cutter applications.
Moresuperhard produces wheel sizes from 1in. (25mm) to 28 inches (720mm) and grit sizes from 40 to 3000 are available.

1f1 type CBN grinding wheels are used for grinding high speed steel (hss) , such as chainsaw sharpening in woodworking tools

► Edge wheel for silicon and sapphire wafer edge grinding. A small diameter wheel is used for notch grinding
► Metal diamond wheel for rough grinding to get an accurate edge profile
► Resin diamond wheel for finish grinding to get good surface roughness