1v1 diamond grinding wheels

Resin bond diamond mounted point is an abrasive tool used for fast stock removal which lasts longer for about four times compared to conventional aluminum oxide mounted points. This makes it a very efficient tool as its increases productivity and clearly cleans more parts in less time. This mounted point is mainly used for machining tungsten carbide cutting tools, optical glass, gem, semi-conductor materials, non-ferrous materials, ceramic, magnetic materials, silicon, glass, quartz, thermal spraying alloy, and non-metallic material grinding.

► Application: harder alloys, ceramics and cermet.
► Bonded: resin bond

Grinding and regrinding cutting tools (pcd inserts, cbn inserts, mono crystal diamond ( MCD ) tools, pcd reamer, carbide tools, cermet inserts)
► Bonded of cutting tools grinding wheel: vitrified diamond cup wheel, resin diamond cup wheel and metal diamond cup wheel
► Diamond Width: 3mm, 5mm, 10mm, 15mm, 20mm
►Grain size can reach 4000# super finish

The bond strength of this type of diamond grinding wheel is weaker than that of other wheels. The self-sharpening for carbide saw blade is better, no blocking.
Diamond and CBN wheels for sharpening circular saw blades (TC, HSS)
Models of grinding wheel: 4A2, 4BT9, 4A9, 3A1, 14A1, 6V5, 6A2, 1A8W, 14F1, etc
CNC machines: Vollmer, Woodtronic, Akemat, Widma and so on

Resin bond diamond grinding wheel for grinding and resharpening carbide drills; Resin bond Cubic Boron Nitride grinding wheel for grinding and resharpening high-speed steel drills.
Advantages:
High grinding efficiency；
High material removal rate；
High tools surface finish and good cutting edge quality；
The shape of the grinding wheel is kept well；
High machining accuracy；
Low loss, low thermal damage, no burn of workpiece；
Wear-resistant, long working life；

Selected diamond abrasive grains
Resin bond which has high precision
Diameter 125mm, Hole 20mm Grit 150#
Used for tungsten carbide, optical glass, gem
Default grit is 150#, Customized shape size and grit is available.

► Diamond; CBN honing stone, honing stick
► Bonded: metal bond
► Materials of workpiece: carbide,glass and ceramic,cast iron,alloy steel, tool steel, die steel, hardened steel copper, aluminum alloy and other abrasive resistant materials
► Applicable area: fine grinding engine pump body, hydraulic cylinder bore, hydraulic pump inner bore, cylinder block, valve,oil cylinder nozzle, the inner surface of the spline bore and cylinder hole and blind hole of other series.

► Bonded: vitrified bond, resin bond, metal bond
► Width: 1mm – 20mm
► Up to #10000 for super finish
► Cutting-edge chipping <5 μm ► Provide dressing wheel to dress PCD grinding wheel

• the manufacture of ball and roller bearings,for grinding raceway profiles.
• drive technology for manufacturing linear guides, ball screws, gear teeth or racks.
• turbine industry for grinding the blades as well as the blade root and fir tree profiles.
• the automotive and -supply industry for grinding camshafts, crankshafts and gear shafts, fuel injection components, piston rings, joints, ball screw drives etc.
• grinding of precision tools such as taps, twist drills, milling cutters, reamers etc.
• general mechanical engineering for grinding hydraulic or pump components.

 Moresuperhard is a leading manufacturer of CBN grinding wheels, which are used for precision grinding, shaping, and finishing of hard materials such as metals, ceramics, and composites

Electroplated tools consist of a single layer of super abrasive grains (Diamond or CBN) fixed on the blank by a nickel galvanic process. The thickness of the nickel-coating is always around half of the diameter of the diamond.
Electroplated bond grinding wheels are mainly used for machining tungsten carbide, ceramics, glass, composite, sapphire, high-speed steel, tool steel, mold steel, stainless steel, cast iron, and so on.

Main Features
1. free cutting action
2. sharp grinding

3. high removal rate
4. good precision
5. without dressing

Body Material: Aluminum or Steel
Grain size: all grain size can be customized
Usage: grinding, sharpening, polishing
Bond: resin,vitrified,electroplated,metal bond are also available
Work piece: metal,HSS,tungsten carbide,glass,stone…etc
Size: all sizes,like 100mm,150mm,175mm,200mm,250mm….etc

Moresuperhard grinding products for ANCA FCP4 machines:
► Application:  precise grinding mould and die, punch pin, optical grinding and form grinding cutting tool ( such as end mill and reamer) and precise instrument
► Model: 1A1, 3A1, 14A1, 1V1, 11V9, 12V9, 4B1, 14K1, 1B9
► Bonded: resin bond & metal bond
► Optical Profile Grinder: Amada, Waida, Wasion, etc
►Provide PCB micro-drill diamond grinding wheel sharpening and shaping

Resin bond diamond mounted point is an abrasive tool used for fast stock removal which lasts longer for about four times compared to conventional aluminum oxide mounted points. This makes it a very efficient tool as its increases productivity and clearly cleans more parts in less time. This mounted point is mainly used for machining tungsten carbide cutting tools, optical glass, gem, semi-conductor materials, non-ferrous materials, ceramic, magnetic materials, silicon, glass, quartz, thermal spraying alloy, and non-metallic material grinding.

► Application: harder alloys, ceramics and cermet.
► Bonded: resin bond

Moresuperhard CBN wheel is suitable for high precision formed wheels. Such as grinding of high precision gear, worm gear hob, gearbox shafts, planetary reducers (sun gear, planetary gears), worm reducers (yin and yang rotors), stator inner teeth and outer rotor grinding.

Vitrified bond diamond grinding wheels have been widely used in the PCD/PCBN tools edge processing, diamond edge processing, carbide cylindrical processing and camshaft grinding and other processing fields. Vitrified bond grinding wheels will produce a lot of heat in the process of high load during dry grinding. Using the cooling fluid with a vitrified grinding wheel the effect is more outstanding.
Many breakthroughs have been made in PCD composite material, CBN composite material and tungsten carbide processing, thus the application range of grinding wheels is wider.
Application: grinding camshaft in automobile

► Application: grinding carbide, ceramic, magnetic materials, stainless steel bar, PCD & PCBN compositives
► Model: 1A1 , 6A1, 9A1
► Bonded Type: Resin bond, Metal bond
► Centerless Grinder Machine: Koyo, Crystec, Dedtru, Landis , Okuma, Paragon, Royal Master, Unison, WMV

► Bonded: resin bonded
► Application: precision grinding micro drill tools
Advantages of micro tool grinding wheel:
* Good edge stability
* High cutting efficiency
* Minimal reject-part rates
* Good round tool quality

Vitrified diamond grinding wheels are suitable for grinding, regrinding cutting tools (such as carbide, ceramic, cermet, pcd, pcbn, cvd, mcd)
Custom PCD tools, CBN tools, CVD diamond tools and Mono Crystal diamond tools cutting, brazing, grinding, sharpening, regrind and retipped service and solution.

Moresuperhard’s vitrified CBN grinding tools with the highest grinding layer for extended wheel life on the machine. Due to the special manufacturing process, very high grinding layers on wheels are possible to shorten the setup costs in the grinding process. 

Features of vitrified CBN grinding wheels:
► longer wheel life
► shorter grinding cycle times
► automated grinding production capabilities with wheels dressed right on the grinder
Vitrified CBN products are ideal for steel and ferrous alloy grinding applications in automotive, aerospace, medical, production tooling, etc. They are excellent thermal conductors and do not react with ferrous materials during the grinding process like diamond does.

► Bond: Metal nickel plating electroplated bond & Resin bond (resin bond also consists of flexible and hard type)
► Length: 150mm – 5000m
► Width: 5mm – 350mm
► Grit: #60,#100,#120,#200,#400,#800,#1500,#2000,#3000,#5000

We provide precision grinding & finishing bearing processing service and solution. There are many types of grinding wheel applications that go into manufacturing bearings.

The Wheel Dresser is designed to provide easy and efficient dressing of diamond /CBN grinding wheels and grinding wheel spindles consisting of several grinding wheels.
►Diamond & CBN wheel dressing machine Models NM-X3 NM-X5 NM-X6
►Applications: -Dressing diamond /CBN grinding wheels -Dressing flat, side, angular, external and profile wheels -Single and multiple wheel combinations

Resin diamond and cbn wheels are used for grinding, sharpening drill (2 tips, 3 tips), milling cutter, tap (2 tips, 3 tips, 4tip), reamer (4tips, 6tips, 8tips), carving cutter and gun drill, etc
The materials of workpiece: tungsten carbide, high speed steel (Hss)
The bonded: resin bond , electroplated bond

Cylindrical Grinder Models: FX27P-60 CNC, FX32P-100 CNC
– Semi Closed Grinder
– Full Cover Grinder
– With Manipulator Grinder
– With Robot Grinder

CNC cylindrical grinder can not only be available for producing shapes like cylinders, but also shapes including cam, ellipse, or crankshaft