We provide precision grinding & finishing bearing processing service and solution. There are many types of grinding wheel applications that go into manufacturing bearings.

► Application: inner grinding of bearing, compressor, CVJ ball-cage, hydraulic tappets, universal joint, stator and rotor.

► Body type: ID Wheel with Shank, ID Wheel without Shank

► Model type: 1A8, 1A1W, 1A1, DWA

► We can offer: abrasive internal grinding wheel (PA, SG), CBN internal grinding wheel, Diamond internal grinding wheel.

► Application: harder alloys, ceramics and cermet.
► Bonded: resin bond

Vacuum brazed diamond grinding wheels are used for grinding cast iron, alloy steels, grey iron, hard composite materials and metal profiles in the foundry industry.

Type: 1A1R, 1A1, 3A1, 1V1, 4A2, 4BT9, 6A2, 11V9, 12A2, 14F, etc。

Diamond /CBN sanding belt is generally composed of three parts: substrate, diamond /CBN and bond.
The resin belt needs more proper grinding pressure during operation.
Size: Width: 5mm~350mm, Length: 150mm~5000mm
Grit: 40#~5000#

► Diamond; CBN honing stone, honing stick
► Bonded: metal bond
► Materials of workpiece: carbide,glass and ceramic,cast iron,alloy steel, tool steel, die steel, hardened steel copper, aluminum alloy and other abrasive resistant materials
► Applicable area: fine grinding engine pump body, hydraulic cylinder bore, hydraulic pump inner bore, cylinder block, valve,oil cylinder nozzle, the inner surface of the spline bore and cylinder hole and blind hole of other series.

Film belt is for grinding steel, stone, glass, ceramics, mono crystalline silicon, polysilicon, zirconia, alumina, metal-nonmetallic synthetic materials, cemented carbide, aluminum-magnesium alloy, aluminum beryllium alloy, titanium alloy and etc. hard brittle materials.

High precision can be achieved with electroplated grinding wheels. More super hard R & D CBN wheels can be customized according to the shape and requirements of the workpiece.

Good self-sharpening and superb grinding efficiency
D750*H305&T75*X10mm
Good for grinding and processing hard and brittle materials such as ceramics, glass and tungsten carbide.

Good self-sharpening and superb grinding efficiency
D750*H305&T75*X10mm
Good for grinding and processing hard and brittle materials such as ceramics, glass and tungsten carbide.

Ensuring an excellent finish by simply drawing the blade through the groove over the two grinding wheels
-Lower cutting time and higher cutting efficiency
-No need for dressing
-Long lifespan
Grit: 80/100, 140/170, 170/200…

Three types of body of CBN wheel：
Aluminum Body: the weigh lighter than the steel body
Steel Body: the weight is the heaviest of the three
Plastic Body: the weight is the lightest of the three. And the freight is relatively low.

Moresuperhard has different vitrified diamond grinding wheels: W40(500# D35) W28(D20) W20 (800# -1000#, D20) W5 (3000# D7) W3.5 (4000# D3) for Coburn, ewag pcd cbn grinder.

Material: WA(white aluminum oxide), GC(green silicon carbide) and CBN (cubic boron nitride).
Application fields: hardware industry, mold industry, metal machining industry, jewelry industry, shoe industry and automobile industry, etc

The honing reamer is equipped with reasonable joints, tools and machine tools, which can achieve the ultra-high precision of the inner hole: Cylindricity: ≤1 μm, Roundness: ≤ 1 μm, Roughness: ≤Ra0.1, Tolerance: ≤1μm

Advantages of vitrified diamond wheels for PCD and PCBN tools :
* The porous structure of the abrasive improved diamond exposure and Can Prevent Vertical Streaks On Workpiece And Improve Surface Quality
* Accurately control geometric tolerances to make a good abrasive layer
* Good Self-Sharpening, High Grinding Efficiency, High Wear Resistance And Less Abrasive Grain Consumption
* High Precision Workpiece. PCD Tools Can Reach High Efficiency, Good Surface Finish And Edge No Chipping
* Vitrified Bond Wheels Offer Tool Life Greater Than 150 Times That Of A Resin Bond Wheel And Can Be Easily Trued And Dressed On The Machine

Applications of vitrified diamond grinding wheel
♦ For tungsten carbide workpieces
♦ Steel based tungsten carbide coating workpiece
♦ Non-metallic materials semi-finishing grinding and finishing grinding, etc.

► Diamond; CBN honing stone, honing stick
► Bonded: metal bond
► Materials of workpiece: carbide,glass and ceramic,cast iron,alloy steel, tool steel, die steel, hardened steel copper, aluminum alloy and other abrasive resistant materials
► Applicable area: fine grinding engine pump body, hydraulic cylinder bore, hydraulic pump inner bore, cylinder block, valve,oil cylinder nozzle, the inner surface of the spline bore and cylinder hole and blind hole of other series.

Diamond Stones:
Harder than all other abrasives
Use with lubricant (water, glass cleaner, Krud Kutter)
Materials: micronized monocrystalline diamonds
Grit range: 120-8000
Costs: $20 – $100
Common Size: 2″x6″, 3″x8″, 4″x10″

Vitrified CBN internal grinding wheels are made of cubic boron nitride abrasives and sintered with metal powder, resin powder and ceramic as a bonding agent to form various shapes of abrasives for industrial grinding, polishing and lapping.

Moresuperhard participated in the China Cutting Tools and Equipments Exhibition 2021. In the exhibition, many friends interested in our diamond grinding wheel and have some questions need us to reply.
We reply to you by video, thank you for your visit!!!

► Application: harder alloys, ceramics and cermet.
► Bonded: resin bond

Usage:
1. Especially used for internal grinding of complex workpieces.
2. Used for dressing abrasive tools.
3. Used for processing industrial ceramics.
4. Suitable for processing and polishing cemented carbide, various molds, stone, glass, jade, gems, teeth, bones, high-speed steel and various high-hardness materials.

Our film belt is ：
1. with high grinding consistency
2. with high grinding capacity to achieve the precise polishing effect
3. with high flexibility to achieve the ideal surface polishing effect
4. Suitable for dry polishing.