1A1 Resin bond diamond cbn cutting Wheel for Tungsten Carbide and glass

Moresuperhard provides precise solutions for cylindrical grinding PDC cutter, repairing PDC drill bits in Oil & Gas industry. We can supply diamond tools include,
► Vitrified/Resin Diamond/CBN Wheel for Cylindrical Grinding PDC Cutter / PDC Drill Bits
► Resin Diamond/CBN Wheel for Cylindrical Grinding PDC Cutter / PDC Drill Bits
► Cylindrical Diamond/CBN Wheel for PDC Cutter chamfer grinding
Model: 1A1 diamond/CBN wheel (diameter up to 1100mm)

Type code:
14F1 Flat shape
Abrasive material:
Diamond & CBN
Bond:
Resin/Bronze/Vitrified/Electroplated
wheel base:
solid Alu body for Resin bond,solid #45 steel for Metal bond
Coarse Grit:
80#/100#/120#/140#/170#/200#/240#/270#/325#
Fine grit:
400#/500#/600#/800#/1000#/1200#/1500#/2000#/3000#
Diamond Concentration:
50%,75%,100%,125%

►High Efficiency
►Long Lifespan
►Wide Range of Applications
►Consistent Performance:
►Low Maintenance

— High-precision, high-efficiency
— Center-going, step-difference forming external cylindrical grinding
— The punches and needles are rough and finely ground at one time, and the finish is high
— With less frequent dressing in the case of vitrified CBN wheels or without dressing in the case of plated CBN wheels

► Application: precise grinding mould and die, punch pin, optical grinding and form grinding cutting tool ( such as end mill and reamer) and precise instrument
► Model: 3A1, 14K1, 1B9
► Bonded: resin bond & metal bond
► Optical Profile Grinder: Amada, Waida, Wasion, etc

►High Precision Centerless Grinding Machines Models:
-FX12S
-FX18S/AS/BS
-FX18HS(Static Pressure Spindle)
-FX20S

►Broad Applications:
-Automotive Industry: shafts, pins, valves, and bearings
-Aerospace Industry: turbine shafts, landing gear components, and fuel system parts
-Medical Industry
-Tool and Die Industry
-Bearings industry
-Tool and Die Industry: cutting tools, punches, and dies with high accuracy and surface quality

High Precision with High Rigidity Body Structure

Body Material: Aluminum or Steel
Grain size: all grain size can be customized
Usage: grinding, sharpening, polishing
Bond: resin,vitrified,electroplated,metal bond are also available
Work piece: metal,HSS,tungsten carbide,glass,stone…etc
Size: all sizes,like 100mm,150mm,175mm,200mm,250mm….etc

Resin bond diamond & CBN wheels are mainly used for small-diameter tungsten, stainless steel or HSS drills, micro drills, and end mills used in electronics, medical technology, and the automotive industry.
Applications: face grinding, top grinding, flank grinding, hollow tooth grinding and re-sharpening for tungsten carbide tipped saw blades and one-piece HSS saws
Models: 4A2, 4BT9, 11A2, 15A2, 12V2, 14F1, etc

►Excellent Grinding Action
►less apt to experience loading, and they dress easily for added convenience
►Convenience and Ease of Use
►Grinding abilities apply to both wet and dry tasks on processing objects such as harden steel, glass, ceramic, carbide alloys, ferrite, refractories, semi conductors, and other electrical carbon products.

► Application: grinding various precision ceramic
► Bonded: resin bond & vitrified bond
► Correct choice of grain size and bonded
* Usually rough grinding uses D126, D91 (Resin bond &Vitrified bond)
* Semi-rough grinding uses D76, D64, D54, D46 (Resin bond & Vitrified bond)
* Semi-finish grinding uses D25, D20 (Resin bond &Vitrified bond)
* Finishing grinding uses D15 (Resin bond)
* Super finishing uses D7, D1 (Resin bond)

► Application: precise grinding mould and die, punch pin, optical grinding and form grinding cutting tool ( such as end mill and reamer) and precise instrument
► Model: 3A1, 14K1, 1B9
► Bonded: resin bond & metal bond
► Optical Profile Grinder: Amada, Waida, Wasion, etc

► Applications: polishing and faceting gemstones (jade, crystal, agate), spinel, sapphire, jewelry, glass artwork, and precision machining industry
► Bonded: resin bond, electroplated bond
► The grain size up to #15000
Features
Backed by a strong Aluminum base, these laps have a sturdy construction and last long.
Perfect for polishing soft gemstones.
Perfectly flat and parallel to the surface to ensure great balance and accuracy.

Metal bonded diamond wheels are best suited for edge rough grinding and have coarser diamonds for higher material removal. The diamonds are embedded in a sintered metal matrix. These wheels can either have a segmented pattern for edge rough grinding or a continuous pattern for fine grinding.
Features:
Wear resistant with a longer service life
The higher material removal rate
High grinding efficiency

– Metal diamond wheel for rough grinding to get accurate edge profile
– Grinded with uniform chamfer width, excellent rigidity
– Strong groove shape retention, long life
– By edge grinding the final diameter is adjusted
– A uniform CBN layer minimizes machining damage
– Highly precise slotted shape support various wafer shapes
It is suitable for making guide vanes and nozzle guide vanes for aviation jet engines, industrial gas turbines, naval gas turbines, and diesel engine nozzles.

► Vitrified bond and Resin bond: vitrified bond has a longer lifespan and higher efficiency than resin bond
► Used for the cylindrical grinding of tungsten carbide
► Models: 6A2(Diameter: 100mm-1200mm)

How to grinding pcd tools with the diamond wheels
Moresuperhard provides custom PCD tools, CBN tools, CVD diamond tools and Mono Crystal diamond tools cutting, brazing, grinding, sharpening, regrind and retipped service and solution.

Resin/virtified/metal bond diamond wheel for silicon wafer can be used for the Japanese ,German, American, Korean and other grinders . Such as Okamoto , Disco, Strasbaugh and others grinding machine.

Moresuperhard provides qualified services For DANOBAT Precision Grinding Machines.
Centerless grinding models：VG, DVG

► Resind diamond/CBN grinding wheels
► Conventional grinding wheels
► Diamond dressing wheels

►Ideal for difficult to grind steel
►Faster stock removal cooler cutting
►Superior form holding

Electroplated （galvanic）CBN profile grinding wheels are used for sharpening high-alloy bandsaw.
CBN grinding wheels are commonly used to process band saws brands, including:
Wood-Mizer, Timberwolf, Simonds, Kasco, Morse, Lenox, Dakin Flathers/Ripper 37 and others

Advantages of vitrified diamond wheels for PCD and PCBN tools :
* The porous structure of the abrasive improved diamond exposure and Can Prevent Vertical Streaks On Workpiece And Improve Surface Quality
* Accurately control geometric tolerances to make a good abrasive layer
* Good Self-Sharpening, High Grinding Efficiency, High Wear Resistance And Less Abrasive Grain Consumption
* High Precision Workpiece. PCD Tools Can Reach High Efficiency, Good Surface Finish And Edge No Chipping
* Vitrified Bond Wheels Offer Tool Life Greater Than 150 Times That Of A Resin Bond Wheel And Can Be Easily Trued And Dressed On The Machine

Moresuperhard has upgraded the grinding products including grinding wheels and grinding dressers that can perfectly match the DANOBAT’s grinding machine for workpiece grinding, in order to meet the grinding needs of customers who use a specific DANOBAT grinding machine.

Porous Ceramic Chuck Tables are widely used as important components of equipment in silicon wafers, semiconductor compound wafers, piezoelectric ceramics, glass, LED, semiconductor package component substrate, optical component thinning, and cutting.

► Application: grinding carbide, ceramic, magnetic materials, stainless steel bar, PCD & PCBN compositives
► Model: 1A1 , 6A1, 9A1
► Bonded Type: Resin bond, Metal bond
► Centerless Grinder Machine: Koyo, Crystec, Dedtru, Landis , Okuma, Paragon, Royal Master, Unison, WMV

Resin bond diamond & CBN wheels are mainly used for small-diameter tungsten, stainless steel or hss drills, micro drills, and end mills used in electronics, medical technology, and the automotive industry.
Advantages of micro tool grinding wheel:
* Good edge stability
* High cutting efficiency
* Minimal reject-part rates
* Good round tool quality

MORESUPERHARD is a professional manufacturer of grinding machines and spindles, cutting, polishing and dressing tools. Thanks to abundant experience in surface treatment, we design and offer a complete grinding and dressing solution to our customers in various industries.