Ultra Thin electroplated diamond cutting wheel
Ultra Thin electroplated diamond cutting wheel for cutting and grinding marble, granite, thermosetting plastics, GRP, pre-sintered and pre-fired (green) materials, fiber glass, electro carbons, graphite, soft ferrites, PVC and pc boards, etc
Applications Of Electroplated Diamond Cutting Wheel, Cutting Disc
Cutting and grinding marble, granite, thermosetting plastics, GRP, pre-sintered and pre-fired (green) materials, fiber glass, electro carbons, graphite, soft ferrites, PVC and pc boards, etc
More SuperHard electroplated diamond saw baldes are usually be fixed on angle grinders, circular saws and handheld saws for cutting granite or marble, etc
Moresuperhard can produce all kinds of Ultra Thin electroplated diamond cutting wheel with special specifications according to the drawings of customers. Precautions for safe operation
- When selecting a saw blade, it should be clear that the saw blade is suitable for processing materials; before use, it should be confirmed whether the saw blade is damaged or deformed. If it is damaged, it is strictly forbidden to use it.
- Before installing the saw blade, remove the dirt attached to the flange; when installing the saw blade, pay attention to keeping the direction of the arrow marked on the saw blade consistent with the direction of rotation of the tool used. Please use a professional wrench to tighten the saw blade during installation.
- After the film is installed, it should be idling for a few minutes first, and then cutting after confirming that there is no swing or jump.
- Before starting the operation, make sure that there are no other people around; when cutting, feed the knife steadily to avoid the impact of the blade contacting the workpiece, cut slowly, and then perform normal cutting after stable. When cutting, it is strictly forbidden to use excessive force and curve cutting. , So as to avoid danger.
- The cutting equipment must have a safety cover. The operator must wear a safety helmet, protective glasses, protective gloves, and masks; wear safety shoes, safety clothing and other labor protection products. Also use ear plugs (earplugs) and masks as needed.
- When cutting, it is forbidden to touch the saw blade in operation with your hands or other parts of the body to avoid danger. When dry cutting, do not perform continuous cutting for a long time, and the cutting equipment should be cooled intermittently to avoid affecting the service life and cutting effect of the saw blade. If used for cutting with water, beware of leakage.
- To ensure safety, please turn off the power on the cutting equipment and pull out the power plug from the socket before replacing the saw blade.
