Metal diamond cbn blades for metallography, photonics cutting
Metal diamond cbn blades for Precision cutting hard materials, ceramic and petrographic samples, plastics and polymers, steel, non-metallic material, circuit board, semiconductor, composites,glass,quartz, crystal, metallography, photonics, semiconductor, etc
The main features of metallographic Metal diamond cbn blades
1. Cutting disc thickness: Metallographic cutting discs are thinner than general wet grinding wheel discs. For example, the thickness of 300mm diameter alumina general disc is 3.2-3.8mm thick, and the thickness of gold photo is 1.5-2mm. The thinner is for better control of cutting. The plastic deformation of the material structure caused by the cutting stress during the cutting process can also better control the accuracy of the cutting position
2. The slit is narrow, which can greatly increase the utilization rate of valuable raw materials
3. High efficiency, sharp cutting, no need for frequent tool changes
4. High rigidity, high strength, long service life
The sizes of Metal diamond cbn blades
Product Specification(mm) | Product Number | Applicable Materials |
100X12.7X0.3 | DIA-100 | Glass,Quartz,Polycrystalline Silicon,Ceramic,Hard Alloy |
127X12.7X0.4 | DIA-125 | Glass,Quartz,Polycrystalline Silicon,Ceramic,Hard Alloy |
150X12.7X0.4 | DIA-150 | Glass,Quartz,Polycrystalline Silicon,Ceramic,Hard Alloy |
175X12.7X0.8 | DIA-175 | Glass,Quartz,Polycrystalline Silicon,Ceramic,Hard Alloy |
200X25.4X0.8 | DIA-200 | Glass,Quartz,Polycrystalline Silicon,Ceramic,Hard Alloy |
230X12.7X1 | DIA-230 | Glass,Quartz,Polycrystalline Silicon,Ceramic,Hard Alloy |
250X32X1 | DIA-250 | Glass,Quartz,Polycrystalline Silicon,Ceramic,Hard Alloy |
300X32X1.8 | DIA-300 | Glass,Quartz,Polycrystalline Silicon,Ceramic,Hard Alloy |
350X32X2 | DIA-350 | Glass,Quartz,Polycrystalline Silicon,Ceramic,Hard Alloy |
400X32X2.5 | DIA-400 | Glass,Quartz,Polycrystalline Silicon,Ceramic,Hard Alloy |